Design of a non-orthogonal symmetrical strip beam position monitor

Qian Mengxiang; Wu Fangfang; Zhou Zeran; Zhou Tianyu; Lu Ping; Sun Baogen

doi:10.11884/HPLPB202032.190425

Volume 32 Issue 6

May 2020

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2020 > 32(6): 064002

Qian Mengxiang, Wu Fangfang, Zhou Zeran, et al. Design of a non-orthogonal symmetrical strip beam position monitor[J]. High Power Laser and Particle Beams, 2020, 32: 064002. doi: 10.11884/HPLPB202032.190425

Citation:

Qian Mengxiang, Wu Fangfang, Zhou Zeran, et al. Design of a non-orthogonal symmetrical strip beam position monitor[J]. High Power Laser and Particle Beams, 2020, 32: 064002. doi: 10.11884/HPLPB202032.190425

Citation:

PDF( 1215 KB)

Design of a non-orthogonal symmetrical strip beam position monitor

doi: 10.11884/HPLPB202032.190425

National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029, China

Received Date: 2019-11-11
Rev Recd Date: 2020-03-09
Publish Date: 2020-05-12

Abstract

Abstract

This paper introduces the approach to design a stripline beam position monitor(BPM) for the project of “THz High-flux Material Physical Property Testing System”, which is hosted by National Synchrotron Radiation Laboratory. Due to the non-orthogonal symmetric vacuum chamber at the exit of the undulator, two kinds of stripline BPMs with rectangular and racetrack vacuum chamber respectively are considered as an option, and compared with the traditional BPM with circular vacuum chamber. The modeling and simulation are based on the boundary element method via Matlab. The simulation results show that the sensitivities of BPMs with rectangular and racetrack vacuum chamber are improved by 30%, the impedance matching errors are reduced by 20%, and the beam position fitting errors are reduced by 80%, compared with the traditional BPM with circular vacuum chamber. Considering the accuracy of processing, the stripline BPM with rectangular vacuum chamber is more suitable for the project.
- non-orthogonal symmetry,
- rectangle,
- racetrack,
- impedance matching,
- induced signal,
- sensitivity,
- fitting error

FullText(HTML)

References(14)

References

[1]	杨永良, 程超才, 孙葆根, 等. 合肥光源钮扣型束流位置检测器的离线标定[J]. 原子能科学技术, 2014, 48(3):541-544. (Yang Yongliang, Cheng Chaocai, Sun Baogen, et al. Calibration of button type beam position monitor for HLS Ⅱ[J]. Atomic Energy Science and Technology, 2014, 48(3): 541-544 doi: 10.7538/yzk.2014.48.03.0541
[2]	Hwang J G, Schiwietz G, Schälicke A, et al. Development of a new button beam-position monitor for BESSY VSR[C]//7th International Beam Instrumentation Conference. 2019: 265-268.
[3]	Wu T, Cao S, Leng Y, et al. Design of stripline BPM for the SHINE project[C]//10th International Particle Accelerator Conference. 2019: 2605-2607.
[4]	李吉浩. 合肥光源直线加速器条带BPM系统的研制[D]. 合肥: 中国科学技术大学, 2006: 11-33. Li Jihao. Research of stripline BPM syetem at HLS LINAC. Hefei: University of Science and Technology of China, 2006: 11-33
[5]	Liu X, Dehler M, Bopp M, et al. Design of resonant stripline BPM for an IR-FEL project at NSRL[C]//10th International Particle Accelerator Conference. 2019: 2665-2667.
[6]	Chen J, Yan Y, Leng Y, et al. Cavity BPM system for DCLS[C]//International Beam Instrumentation Conference. 2016: 661-664.
[7]	Chen F, Chen J, Leng Y, et al. SXFEL Linac BPM System development and performance evaluation[C]//9th International Particle Accelerator Conference. 2018: 4794-4796.
[8]	Wang Q, Liu X, Lu P, et al. A study on the improved cavity bunch length monitor for FEL[C]//60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18). 2018: 39-42.
[9]	罗箐, 孙葆根, 何多慧, 等. 新型跑道腔式束流位置监测器[J]. 强激光与粒子束, 2010, 22(7):1635-1639. (Luo Qing, Sun Baogen, He Duohui, et al. Beam position moniter with racetrack cavity[J]. High Power Laser and Particle Beams, 2010, 22(7): 1635-1639 doi: 10.3788/HPLPB20102207.1635
[10]	刘建宏, 刘祖平, 裴元吉, 等. 边界元素法在NSRL束测系统调试中的应用[J]. 强激光与粒子束, 2000, 12(2):254-256. (Liu Jianhong, Liu Zuping, Pei Yuanji, et al. Boundary element method and its application in the test of NESL BPM system[J]. High Power Laser and Particle Beams, 2000, 12(2): 254-256
[11]	Yuan R, Yue J, Cao J, et al. Simulation of BEPC II's BPM[J]. High Energy Physics and Nuclear Physics, 2004, 28(6): 664-668.
[12]	Zhou J, Yue J, Cao J, et al. Design and simulation of cavity BPM for BEPCII[J]. Radiation Detection Technology and Methods, 2019, 3(3): 49-54. doi: 10.1007/s41605-019-0125-z
[13]	Ergun S. Application of principle of least squares to families of straight lines[J]. Industrial & Engineering Chemistry, 1956, 48(11): 2063-2068.
[14]	Chang X W, Zhou T. MILES: MATLAB package for solving mixed integer least squares problems[J]. GPS Solutions, 2007, 11(4): 289-294. doi: 10.1007/s10291-007-0063-y