Measurement signal processing technology for magnetic axis of solenoid based on pulsed tuat-wire method

Jiang Xiaoguo; Yang Xinglin; Jiang Wei; Liao Shuqing; Zang Zongyang; Liu Yunlong; Long Quanhong; Li Jiayuan

doi:10.11884/HPLPB202032.190431

Volume 32 Issue 4

Mar. 2020

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2020 > 32(4): 045103

Jiang Xiaoguo, Yang Xinglin, Jiang Wei, et al. Measurement signal processing technology for magnetic axis of solenoid based on pulsed tuat-wire method[J]. High Power Laser and Particle Beams, 2020, 32: 045103. doi: 10.11884/HPLPB202032.190431

Citation:

Jiang Xiaoguo, Yang Xinglin, Jiang Wei, et al. Measurement signal processing technology for magnetic axis of solenoid based on pulsed tuat-wire method[J]. High Power Laser and Particle Beams, 2020, 32: 045103. doi: 10.11884/HPLPB202032.190431

Citation:

PDF( 1089 KB)

Measurement signal processing technology for magnetic axis of solenoid based on pulsed tuat-wire method

doi: 10.11884/HPLPB202032.190431

Institute of Fluid Physics, CAEP, Mianyang 621999, China

Received Date: 2019-11-18
Rev Recd Date: 2019-02-05
Publish Date: 2020-03-06

Abstract

Abstract

In measurement of magnetic axis of solenoid, there are some key difficulties to overcome, such as precision measurement of tuat-wire vibration and position, reducing measurement signal distortion, and separative data processing for offset and tilt signal in magnetic axis of solenoid. One kind of signal detect and measurement principle of extracting the useful faintness signal via subtracting the high offset level signal from the total measurement signal is adopted to meet the above need. The method of constant current driving the detector is also adopted to obtain more stable and anti-jamming signal. The measurement system has been developed for directly obtaining the pure vibration signal of the tuat-wire. The problems of obtaining completely exact measurement signal by simply using an AC coupling amplifier or band-pass filter are resolved and the faint signal can be obtained without aberration. The influence produced by tilt and ups-and-downs in low frequency component of base line signal is eliminated ulteriorly. The separative data processing for offset and tilt signal is also achieved to some extent. The measurement sensitivity has been improved maximumly by about an order of magnitude.
- pulsed tuat-wire method,
- magnetic axis measurement,
- solenoid,
- signal differential processing

FullText(HTML)

References(7)

References

[1]	丁伯南, 邓建军, 王华岑, 等. “神龙一号”直线感应电子加速器[J]. 高能物理与核物理, 2005, 29(6):604-610. (Ding Bonan, Deng Jianjun, Wang Huacen, et al. Dragon-I linear induction electron accelerator[J]. High Energy Physics and Nuclear Physics, 2005, 29(6): 604-610 doi: 10.3321/j.issn:0254-3052.2005.06.015
[2]	石金水, 邓建军, 章林文, 等. 神龙二号加速器及其关键技术[J]. 强激光与粒子束, 2016, 28:010201. (Shi Jinshui, Deng Jianjun, Zhang Linwen, et al. Dragon - II accelerator and its key technology[J]. High Power Laser and Particle Beams, 2016, 28: 010201 doi: 10.11884/HPLPB201628.010201
[3]	Melton J G, Burns M J, Honaberger D J. Pulsed taut-wire measurement of the magnetic alignment of the ITS induction cells[C]// Proceedings of Particle Accelerator Conference. 1991.
[4]	Bonnafond C, Villate D. Alignment techniques for the high current AIRIX accelerator[C]//Proceedings of Particle Accelerator Conference. 1999, 2: 1381-1383.
[5]	章文卫, 李洪, 王华岑, 等. 采用脉冲悬丝法测量强流加速腔聚焦场磁轴[J]. 强激光与粒子束, 1996, 8(2):203-208. (Zhang Wenwei, Li Hong, Wang Huacen, et al. Pulsed wire magnetic field alignment measurements on a high current induction cell[J]. High Power Laser and Particle Beams, 1996, 8(2): 203-208
[6]	王科, 代志勇, 廖树清, 等. 用于线圈磁轴测量的滤波放大电路的设计改进[J]. 太赫兹科学与电子信息学报, 2015, 13(5):775-778. (Wang Ke, Dai Zhiyong, Liao Shuqing, et al. Design and improvement of filter circuit for solenoid magnet axis measurement[J]. Journal of Terahertz Science and Electronic Information Technology, 2015, 13(5): 775-778 doi: 10.11805/TKYDA20150518.775
[7]	Arbelaez D, Kwan J W, Lipton T M, et al. Magnetic alignment of pulsed solenoids using the pulsed wire method[C]// Proceedings of Particle Accelerator Conference. 2011: 2087-2089.