Volume 32 Issue 10
Sep.  2020
Turn off MathJax
Article Contents
Zhou Jiashen, He Jun, Du Yaoyao, et al. Cavity beam position monitor design optimization and offline test for BEPCII[J]. High Power Laser and Particle Beams, 2020, 32: 104001. doi: 10.11884/HPLPB202032.200158
Citation: Zhou Jiashen, He Jun, Du Yaoyao, et al. Cavity beam position monitor design optimization and offline test for BEPCII[J]. High Power Laser and Particle Beams, 2020, 32: 104001. doi: 10.11884/HPLPB202032.200158

Cavity beam position monitor design optimization and offline test for BEPCII

doi: 10.11884/HPLPB202032.200158
  • Received Date: 2020-06-09
  • Rev Recd Date: 2020-08-25
  • Publish Date: 2020-09-29
  • In BEPCⅡ, button BPM and stripline BPM cannot reach sufficient precise resolution for beam transverse displacement. This project aims at the design of cavity BPM for BEPCⅡ linac. Position cavity in cavity beam position monitor (CBPM) is an re-entrant resonator with four rectangular waveguides. TM110 mode frequency is chosen in S band, and the radius of beam pipe is 23 mm. TM010 mode in reference cavity is almost as same as TM110 mode in position cavity. According to the results of offline test, characterized parameters of CBPM coincided with computer simulated data. The frquency of TM110 mode are 2502 MHz in horizontal direction and 2503 MHz in vertical direction. Cross-talk isolation for position cavity is better than −44.7 dB. Ratio front circuits included filtration, amplification and down-convertion when signals extracted from CBPM. Offline caliberation test results showed that CBPM has excellent measurement value of linearity area, which is over 10 mm. After frequency spectrum analysis and linear fitting, the position resolution of CBPM is 2.87 μm in horizontal direction and 2.16 μm in vertical direction.
  • loading
  • [1]
    Inoue Y, Hayano H, Honda Y, et al. Development of a high-resolution cavity-beam position monitor[J]. Physical Review Special Topics - Accelerators and Beams, 2008, 11: 062801. doi: 10.1103/PhysRevSTAB.11.062801
    [2]
    Lorenz R. Cavity beam position monitors[C]//AIP Conference Proceedings. 1999: 53-73.
    [3]
    Wiedemann H. Particle accelerator physics[M]. USA: Springer, 2007.
    [4]
    Jackson J. Classical electrodynamics[M]. John Wiley & Sons. 2007.
    [5]
    Pozar D M. Microwave engineering (Third edition)[M]. Publishing House of Electronics Industry. 2010.
    [6]
    Lorenz R, Sabah S, et al. Cavity-type beam position monitors for the SASE FEL at the TESLA Test Facility[R]. CM-P00042566, 2003.
    [7]
    Luo Qing, Sun Baogen. Design of S-band re-entrant cavity BPM[J]. Nuclear Science and Techniques, 2009, 20(3): 133-139.
    [8]
    Sargsyan V. Cross-talk problem in pillbox cavity[R]. Technische Universitat Berlin and DESY-Zeuthen, TESLA 2003-01.
    [9]
    Chen Xiangcheng. History of cavity beam position monitors[R]. GSI-Report-2014-3.
    [10]
    Zhou Jiashen, Cao Jianshe, Sui Yanfeng, et al. Design and simulation of cavity BPM for BEPCII[J]. Radiation Detection Technology and Methods, 2019, 3(3): 1-6.
    [11]
    Dassault System. CST Studio Instruction Book[EB/OL]. https://www.3ds.com/products-services/simulia/products/cst-studio-suite/solvers/.
    [12]
    [13]
    Teledyne LeCroy WavePro 760Zi-A Introduction[EB/OL]. http://www.teledynelecroy.com.cn/product/proDetail_29.html.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(9)  / Tables(1)

    Article views (1087) PDF downloads(47) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return