[1] 刘哲, 张丽. γ射线CT放射性废物桶检测技术综述[J]. CT理论与应用研究, 2014, 23(6):1025-1040. (Liu Zhe, Zhang Li. Review of γ-ray CT for radioactive waste assay[J]. CT Theory and Applications, 2014, 23(6): 1025-1040
[2] 张全虎. 层析γ扫描(TGS)重建技术的研究[D]. 北京: 中国原子能科学研究院, 2003.

Zhang Quanhu. Research of tomographic gamma scanning (TGS) reconstruction technique[D]. Beijing: China Institute of Atomic Energy, 2003
[3] 莫继锋, 李美山, 张存平, 等. SGS技术在放射性固体废物整备检测中的应用[J]. 核电子学与探测技术, 2014, 34(8):950-953. (Mo Jifeng, Li Meishan, Zhang Cunping, et al. Application on the SGS technology in the measurement of radioactive solid waste conditioning[J]. Nuclear Electronics and Detection Technology, 2014, 34(8): 950-953 doi: 10.3969/j.issn.0258-0934.2014.08.008
[4] 周志波. 桶装核废物快速检测方法研究[D]. 北京: 中国原子能科学研究院, 2007.

Zhou Zhibo. Research on the analysis method for the fast measurement of nuclear waste with γ spectrum[D]. Beijing: China Institute of Atomic Energy, 2007
[5] Parker J L. Use of calibration standards and the correction for sample self-attenuation in gamma-ray nondestructive assay[J]. Inorganic Organic Physical & Analytical Chemistry, 1984.
[6] Prettyman T H, Reilly T D, Miller M C, et al. Advances in nuclear instrumentation for safeguards[R]. LA-UR-96-3757, 1996
[7] Camp D C, Martz H E, Roberson G P, et al. Nondestructive waste-drum assay for transuranic content by gamma-ray active and passive computed tomography[J]. Nuclear Instruments and Methods in Physics Research A, 2002, 495: 69-83. doi: 10.1016/S0168-9002(02)01315-3
[8] Hsue S T, Stewart J E. Guide to nondestructive assay standard preparation, criteria, availability and practical considerations[R]. La-13340-Ms, 2000.
[9] 刘月恒, 屠荆, 仲云红. 环境样品测量中的一种自吸收校正方法研究[C]//全国第5届核仪器及其应用学术会议. 2005.

Liu Yueheng, Tu Jing, Zhong Yunhong. A method of self-sorption correction for environmental radioactive measurement[C]//Proceedings of the 5th National Conference on Nuclear Instrument & Its Application. 2005
[10] Bosko A, Geurkov G, Croft S, et al. Advanced approach for calibration of the segmented gamma scanner for the radioassay of drummed waste[C]//2006 IEEE Nuclear Science Symposium Conference Record. 2006: 212-213.
[11] Nakazawa D, Bronson F, Croft S, et al. The efficiency calibration of non-destructive gamma assay systems using semi-analytical mathematical approaches[C]//WM2010 Conference. 2010.
[12] 易珂. 中低放射性废物活度无源γ测量实验及模拟计算研究[D]. 上海: 上海交通大学, 2009.

Yi Ke. Experimental study and simulation of the passive gamma measurement on low-and-intermediate-level radioactive waste[D]. Shanghai: Shanghai Jiao Tong University, 2009
[13] Liang J H, Jiang S H, Chou G T, et al. A theoretical investigation of calibration methods for radwaste radioactivity detection systems[J]. Applied Radiation and Isotopes, 1996, 47(7): 669-675. doi: 10.1016/0969-8043(96)00031-0
[14] Bruggeman M, Gerits J, Carchon R. A minimum biased shell-source method for the calibration of radwaste assay systems[J]. Applied Radiation and Isotopes, 1999, 51(3): 255-259. doi: 10.1016/S0969-8043(99)00041-X
[15] 徐利军, 叶宏生, 张卫东, 等. 分段γ扫描装置校准用桶状标准源的设计[J]. 核技术, 2015, 38:050502. (Xu Lijun, Ye Hongsheng, Zhang Weidong, et al. Design of reference radioactive source of waste drum used in calibration of segmented gamma scan device[J]. Nuclear Techniques, 2015, 38: 050502
[16] 许淑艳. 蒙特卡罗方法在实验核物理中的应用[M]. 北京: 原子能出版社, 2006.

Xu Shuyan. Application of Monte Carlo method in nuclear physics experiment[M]. Beijing: Atomic Energy Press, 2006
[17] Dung T Q. Calculation of the systematic error and correction factors in gamma waste assay system[J]. Annals of Nuclear Energy, 1997, 24(1): 33-47. doi: 10.1016/0306-4549(96)00059-X