[1] 王巍, 何晓业, 姚秋洋, 等. 磁铁快速安装准直方法在HLSⅡ升级改造中的应用[J]. 强激光与粒子束, 2015, 27:045104. (Wang Wei, He Xiaoye, Yao Qiuyang, et al. Application and research of magnets rapid installation and alignment method in HLSⅡ upgrade project[J]. High Power Laser and Particle Beams, 2015, 27: 045104 doi: 10.3788/HPLPB20152704.45104
[2] Wang W, He X Y, Wang P, et al. The surveying data processing of control network based on HLS upgrade[C]//Proc of IPAC. 2013: 2986-2988.
[3] 孔祥元, 郭际元, 刘宗泉. 大地测量学基础[M]. 武汉: 武汉大学出版社, 2010: 44-49.

Kong Xiangyuan, Guo Jiyuan, Liu Zongquan. Foundation of geodesy[M]. Wuhan: Wuhan University Press, 2010: 44-49
[4] 张正禄, 李广云, 潘国荣, 等. 工程测量学[M]. 武汉: 武汉大学出版社, 2005: 227-230.

Zhang Zhenglu, Li Guangyun, Pan Guorong, et al. Engineer geodesy[M]. Wuhan: Wuhan University Press, 2005: 227-230
[5] 王小龙, 董岚, 李波, 等. BEPCⅡ储存环的预准直[J]. 核技术, 2010, 33(8):566-570. (Wang Xiaolong, Dong Lan, Li Bo, et al. The prealignment of the BEPCⅡ storage rings[J]. Nuclear Technique, 2010, 33(8): 566-570
[6] 刘祖平. 同步辐射光源物理引论[M]. 合肥: 中国科学技术大学出版社, 2009: 161-162.

Liu Zuping. Introduction of physics of Synchrotron Radiation Light Source[M]. Heifei: University of Science and Technology of China Press, 2009: 161-162
[7] 张森, 杨玉萍, 季彬彬, 等. 龙门加工中心横梁组件静动态分析及结构改进[J]. 组合机床与自动化加工技术, 2013, 8:56-56. (Zhang Sen, Yang Yuping, Ji Binbin, et al. Finite element analysis and structure improvement of gantry machining center crossbeam component[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2013, 8: 56-56
[8] 陈宇. 泡沫铝夹芯结构油罐车罐体优化设计及其关键性能分析[D]. 葫芦岛: 辽宁工程技术大学, 2017: 32.

Chen Yu. Optimization design and key performance analysis of aluminum foam sandwich structure tank[D]. Huludao: Liaoning Technical University, 2017: 32
[9] 张朝晖. ANSYS 12.0热分析工程应用实战手册[M]. 北京: 中国铁道出版社, 2010: 423.

Zhang Chaohui. ANSYS 12.0 practical handbook for the engineering thermal analysis[M]. Beijing: China Railway Press, 2010: 423
[10] 聂小军, 刘磊, 康玲, 等. 一种废束站束窗结构设计与优化[J]. 强激光与粒子束, 2018, 30:105105. (Nie Xiaojun, Liu Lei, Kang Ling, et al. Structure design and optimization of a dump beam window[J]. High Power Laser and Particle Beams, 2018, 30: 105105 doi: 10.11884/HPLPB201830.180057