留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

百纳秒近方波高压脉冲形成模块的设计与实验研究

李飞 张恺烨 朱明冬 宋法伦 金晓 甘延青 龚海涛

李飞, 张恺烨, 朱明冬, 等. 百纳秒近方波高压脉冲形成模块的设计与实验研究[J]. 强激光与粒子束, 2018, 30: 085004. doi: 10.11884/HPLPB201830.170346
引用本文: 李飞, 张恺烨, 朱明冬, 等. 百纳秒近方波高压脉冲形成模块的设计与实验研究[J]. 强激光与粒子束, 2018, 30: 085004. doi: 10.11884/HPLPB201830.170346
Li Fei, Zhang Kaiye, Zhu Mingdong, et al. High-voltage pulse forming module with hundreds-nanosecond quasi-squared output pulse[J]. High Power Laser and Particle Beams, 2018, 30: 085004. doi: 10.11884/HPLPB201830.170346
Citation: Li Fei, Zhang Kaiye, Zhu Mingdong, et al. High-voltage pulse forming module with hundreds-nanosecond quasi-squared output pulse[J]. High Power Laser and Particle Beams, 2018, 30: 085004. doi: 10.11884/HPLPB201830.170346

百纳秒近方波高压脉冲形成模块的设计与实验研究

doi: 10.11884/HPLPB201830.170346
基金项目: 国家高技术发展计划项目
详细信息
    作者简介:

    李飞(1987-), 男, 博士, 从事脉冲功率技术研究; shanxilifei@163.com

    通讯作者:

    宋法伦(1977-), 男, 博士, 从事脉冲功率技术研究; emplasma@ustc.edu

  • 中图分类号: TN782; TM832

High-voltage pulse forming module with hundreds-nanosecond quasi-squared output pulse

  • 摘要: 基于高功率脉冲功率系统小型化和模块化发展要求,研制了一种集储能和脉冲形成功能为一体的脉冲形成模块。通过发展非均匀脉冲形成技术,成功将传统脉冲形成网络的级数降至两级,并保持其输出波形为近方波,大幅降低了近方波脉冲形成模块的体积重量。模块内部电容采用串联分压结构以提高其耐电压值,采用折叠式薄膜电容以提高其储能密度,结合薄膜/变压器油混合绝缘方式,实现了紧凑化、耐高压设计。利用PSpice电路仿真,结合最坏情况模拟等方法,分析了模块内部电参数对其输出特性的影响,并进行了实验验证。模块耐电压值可达120 kV,单次储能密度高达41 kJ·m-3,可输出脉宽约180 ns的近方波高压脉冲。该模块将传统需要五级以上的脉冲形成网络的实际应用发展到两级,有利于实现多级高压方波Marx系统的紧凑化、模块化设计。
  • 图  1  雷利型PFN原理电路

    Figure  1.  Equivalent electrical circuit for the Leily-style PFN

    图  2  脉冲形成模块原理电路

    Figure  2.  Equivalent electrical circuit for the pulse forming module

    图  3  脉冲形成模块结构示意图

    Figure  3.  Schematic structural view of the pulse forming module

    图  4  脉冲形成模块的电容器内部结构示意图

    Figure  4.  Internal structure of the pulse forming module

    图  5  脉冲形成模块电容值变化时输出波形的最大偏差

    Figure  5.  Worst cases of the output waveform of pulse forming module with the deviation of capacitors

    图  6  回路电感值变化对输出波形的影响

    Figure  6.  Influence of the inductances on output waveform of the pulse forming module

    图  7  脉冲形成模块实物照片

    Figure  7.  Picture of the pulse forming module

    图  8  脉冲形成模块的PSpice电路模型及模拟结果与实验结果

    Figure  8.  PSpice model of the pulse forming module and output waveforms

    图  9  脉冲形成模块20次输出波形

    Figure  9.  Output waveform of the pulse forming module working for 20 times

  • [1] 王莹, 孙元章, 刘开培, 等. 脉冲功率科学与技术[M]. 北京: 北京航空航天大学出版社, 2010.

    Wang Ying, Sun Yuanzhang, Liu Kaipei, et al. Science and technology on pulsed power. Beijing: Beihang University Press, 2010
    [2] Adamenko S, Esaulov A, Ulmen B, et al. Exploring new frontiers in the pulsed power laboratory: Recent progress[J]. Results in Physics, 2015, 5: 62-68. doi: 10.1016/j.rinp.2015.02.005
    [3] Deng Jianjun, Shi Jinshui, Xie Weiping, et al. Overview of pulsed power research at CAEP[J]. IEEE Transactions on Plasma Science, 2015, 43(8): 2760-2765. doi: 10.1109/TPS.2015.2452192
    [4] Akiyama H, Sakai S, Sakugawa T, et al. Environmental applications of repetitive pulsed power[J]. IEEE Transactions on Dielectrics & Electrical Insulation, 2007, 14(4): 825-833.
    [5] 江伟华. 高重频脉冲开关与紧凑型脉冲功率源[C]//四川省电子学会高能电子学专业委员会第七届学术交流会. 2011: 7-11.

    Jiang Weihua. High-repetition pulse switch and compact pulsed power source//Proceedings of the 7th Academic Symposium of Sichuan Electronic Society High Energy Electronics Committee. 2011: 7-11
    [6] Novac B M, Kumar R, Smith I R. A Tesla-pulse forming line-plasma opening switch pulsed power generator[J]. Review of Scientific Instruments, 2010, 81: 104704. doi: 10.1063/1.3484193
    [7] Jin Y S, Lim S W, Cho C H, et al. High voltage ultrawide band pulse generator using Blumlein pulse forming line[J]. Review of Scientific Instruments, 2012, 83: 044704.
    [8] Li Z, Yang J, Liu L. A compact repetitive PFN-Marx generator[C]//IEEE International Conference on Plasma Sciences (ICOPS). 2015.
    [9] 宋法伦, 金晓, 李飞, 等. 20 GW紧凑Marx型重复频率脉冲驱动源研制进展[J]. 强激光与粒子束, 2017, 29: 020101. doi: 10.11884/HPLPB201729.160510

    Song Falun, Jin Xiao, Li Fei, et al. Progress on 20 GW compact repetitive Marx generator development. High Power Laser and Particle Beams, 2017, 29: 020101 doi: 10.11884/HPLPB201729.160510
    [10] Liu H, Xie W, Yuan J, et al. Design of compact Marx module with square pulse output[J]. Review of Scientific Instruments, 2016, 87: 074706. doi: 10.1063/1.4958644
    [11] Nunnally C, Lara M, Mayes J R, et al. A compact 700-kV erected pulse forming network for HPM applications[C]//IEEE Conference on Pulsed Power. 2011: 1372-1376.
    [12] Nunnally C, Mayes J R, Hatfield C W, et al. Design and performance of an ultra-compact 1.8-kJ, 600-kV pulsed power system[C]//IEEE Pulsed Power Conference. 2009: 930-933.
    [13] 李飞, 宋法伦, 甘延青, 等. 低抖动Marx型触发源系统设计与实验[J]. 太赫兹科学与电子信息学报, 2017, 15(2): 501-505. https://www.cnki.com.cn/Article/CJFDTOTAL-XXYD201702029.htm

    Li Fei, Song Falun, Gan Yanqing, et al. Design and test on Marx trigger source with low output jitter. Journal of Terahertz Science and Electronic Information Technology, 2017, 15(2): 501-505 https://www.cnki.com.cn/Article/CJFDTOTAL-XXYD201702029.htm
  • 加载中
图(9)
计量
  • 文章访问数:  957
  • HTML全文浏览量:  182
  • PDF下载量:  146
  • 被引次数: 0
出版历程
  • 收稿日期:  2017-08-31
  • 修回日期:  2018-04-18
  • 刊出日期:  2018-08-15

目录

    /

    返回文章
    返回