基于MATLAB的合肥光源储存环束流轨道校正系统
MATLAB based beam orbit correction system of HLS storage ring
-
摘要: 闭轨畸变对合肥同步光源的束流质量产生负面影响，因此必须对闭轨畸变进行校正。本文介绍了基于MATLAB的合肥光源储存环束流轨道校正系统的工作原理、开发过程及测试结果。该系统由束流轨道测量系统、校正铁系统和控制系统组成，基于MATLAB开发的束流轨道校正程序运行于操作员界面工作站上。首先对获取的束流轨道数据进行分析和计算，然后通过控制系统改变校正铁电源的电流以改变校正铁磁场强度，从而实现轨道校正。测试结果表明：束流轨道的最大畸变由校正前的4.468 mm下降到校正后的0.299 mm；标准方差（SDEV）由校正前的2.986 mm下降到校正后的0.087 mm。该系统达到了设计目标。Abstract: The distortion of closed orbit usually causes much side effect which is harmful to synchrotron radiation source such as HLS, so it is necessary to correct the distortion of closed orbit. In this paper, the correction principle, development procedure and test of MATLAB based on beam orbit correction system of HLS storage ring are described. The correction system is consisted of the beam orbit measure system, corrector magnet system and the control system, and the beam orbit correction code based on MATLAB is working on the operation interface. The data of the beam orbit are analyzed and calculated firstly, and then the orbit is corrected by changing corrector strength via control system. The test shows that the distortion of closed orbit is from max 4.468 mm before correction to max 0.299 m
-
点击查看大图
计量
- 文章访问数: 2684
- HTML全文浏览量: 283
- PDF下载量: 708
- 被引次数: 0
下载:
