Survey and alignment for cyclotron injection system of the Wuwei Heavy Ion Medical Machine
-
摘要: 武威重离子治癌装置回旋注入系统由自重50余吨的回旋加速器和离子源等多个元件组成,由于离子源和回旋加速器的上下共架结构及回旋注入系统自身过于紧凑等原因,给各元件的安装准直工作增加了难度。借助于激光跟踪仪和三维控制网,通过自下而上分级准直安装及高空架设仪器的方法,克服了通视条件不足等困难,有效提高了工作效率,所有的安装元件误差都控制在0.10 mm以内,其结果好于该装置的安装精度要求。回旋注入系统已成功出束,各项指标均已达到或优于设计指标,从而验证了准直安装工作的准确性与可行性。Abstract: The Cyclotron Injection System of the Wuwei Heavy Ion Medical Machine consists of a cyclotron that has a weight more than 50 tons, an ion source and some auxiliary facilities. As the ion source and the cyclotron use one girder and have a very tight construction, it is difficult to install and align the system. By the aid of a laser tracker and a three-dimensional control network, through step by step survey and alignment from bottom to top, our method improves the work efficiency of alignment and guarantees a 0.10 mm deviation for each finally installed magnet in each direction. The results are better than the installation precision demands of the Heavy Ion Medical Machine. Currently, the cyclotron injection system has been successfully commissioned and the performance is proved well, and some indexes are better than the design targets, which also verify that the method used for this system has a high accuracy and feasibility.
点击查看大图
计量
- 文章访问数: 1016
- HTML全文浏览量: 213
- PDF下载量: 278
- 被引次数: 0