Simulation of 300 MV·A motor generator feeding the toroidal field power supply
-
摘要: 为实现对环向场电流的高效准确控制，提高中国环流器二号M托卡马克装置的实验效率，开展了针对300 MV·A六相脉冲发电机组向环向场脉冲放电的仿真研究。从300 MV·A六相脉冲发电机组向聚变装置环向场供电系统的拓扑出发，以等效处理分析为基础建立了仿真模型并进行脉冲放电动态过程仿真。通过对比分析仿真波形与300 MV·A六相脉冲发电机组向HL-2A装置供电的实际波形，验证了仿真模型的可靠性和合理性。在此基础上进行了300 MV·A六相脉冲发电机组向HL-2M环向场供电过程仿真研究，根据不同的环向场电流平顶值，得到了其对应的300 MV·A六相脉冲发电机组励磁电压控制波形，可以作为下阶段装置高参数实验实际控制的重要参考和先进控制策略研究平台。Abstract: To control the toroidal field current efficiently and accurately, and to improve the experimental efficiency of the HL-2M tokamak, a simulation study on 300 MV·A six-phase motor generator (MG) feeding the toroidal field power supply (TFPS) is carried out. The topology of 300 MV·A six-phase MG feeding the TFPS is introduced, and its simulation model is established based on the equivalent processing analysis and the dynamic process of pulse discharge is simulated. The reliability and rationality of the simulation model are verified by comparing the simulation waveforms with the actual waveforms of the 300 MV·A six-phase MG feeding the TFPS of the HL-2A Tokamak. On this basis, the simulation of 300 MVA six-phase MG feeding the TFPS of HL-2M is carried out, and the corresponding excitation voltage control waveforms of the MG are obtained according to the different flat top values of the TF current, providing an important reference for the next stage high-parameter experimental control and research platform of advanced control strategy.
-
Key words:
- toroidal field /
- motor generator /
- power supply system /
- simulation /
- excitation voltage
-
图 1 机组向装置环向场供电原理图
Figure 1. Schematic diagram of the MG feeding the TF power supply of fusion device
图 3 300MV·A脉冲发电机组向环向场供电仿真模型
Figure 3. Simulation model of a 300 MV·A MG feeding the TF power supply
图 5 机组向环向场供电的对比图
Figure 5. Comparison between simulation results and experimental waveforms
图 8 励磁电压控制波形（初始转速400 r/min）
Figure 8. Excitation voltage control waveforms (initial speed 400 r/min)
图 9 励磁电压控制波形（初始转速500 r/min）
Figure 9. Excitation voltage control waveforms (initial speed 500 r/min)
表 1 同步发电机的主要参数
Table 1. Main parameters of synchronous generator
rated
voltage/Vrated
current/Aconnecting
moderated speed/
(r/min)rated
frequency/Hzrotational
inertia/(kg·m2)rated excitation
voltage/Vrated excitation
current/A3000 29 000 dual Y shift 30° 335~500 67~100 7 300 000 3492~4093 301~353 
下载: 导出CSV
表 2 环向场的主要参数
Table 2. Main parameters of the toroidal field
maximum magnetic
induction/Tinductance/mH resistance/mΩ time constant/s maximum flat-top
time/sTF of HL-2A 2.8 230 58 4 5 TF of HL-2M 3 32 4 8 7
下载: 导出CSV
-
[1] 刘永, 李强, HL-2M研制团队. 中国环流器二号M(HL-2M)托卡马克主机研制进展[J]. 中国核电, 2020, 13(6):747-752. (Liu Yong, Li Qiang, HL-2M Development Team. The development progress of the tokamak machine for HL-2M[J]. China Nuclear Power, 2020, 13(6): 747-752 [2] 宣伟民, 彭建飞, 李华俊, 等. 300MVA脉冲发电机系统研制进展[C]//2013核工业西南物理研究院年报. 2014: 98-100Xuan Weimin, Peng Jianfei, Li Huajun, et al. Development progress of 300MVA motor generator[C]//Southwestern Institute of Physics, Annual Report 2013 of Southwestern Institute of Physics. 2013: 98-100 [3] 彭建飞, 王树锦, 李华俊, 等. 基于Matlab/Simulink的环向磁场脉冲电源建模与仿真[J]. 核聚变与等离子体物理, 2004, 24(4):254-258. (Peng Jianfei, Wang Shujin, Li Huajun, et al. Modeling and simulation of toroidal field power supply system of the HL-2A tokamak based on Matlab/Simulink[J]. Nuclear Fusion and Plasma Physics, 2004, 24(4): 254-258 doi: 10.3969/j.issn.0254-6086.2004.04.003 [4] 李华俊, 徐丽荣, 刘学梅, 等. HL-2A装置环向场电源系统及其控制[J]. 兵工自动化, 2004, 23(1):55-57. (Li Huajun, Xu Lirong, Liu Xuemei, et al. Power supply system and its control of HL-2A toroidal field[J]. Ordnance Industry Automation, 2004, 23(1): 55-57 doi: 10.3969/j.issn.1006-1576.2004.01.022 [5] 陈宇红, 王尚柄. HL-2A装置环向场电源系统设计[J]. 中国核科技报告, 1999(s2):52-55. (Chen Yuhong, Wang Shangbing. Design of HL-2A toroidal field power supply system[J]. China Nuclear Science and Technology Report, 1999(s2): 52-55 [6] 康莉, 王树锦. HL-2A装置环向场电源系统的EMTP仿真[J]. 电工技术, 2003(6):14-15. (Kang Li, Wang Shujing. EMTP simulation of HL-2A unit circular field power supply system[J]. Electric Engineering, 2003(6): 14-15 doi: 10.3969/j.issn.1002-1388.2003.06.006 [7] Peng Jianfei, Xuan Weimin, Wang Haibing, et al. Study on matching a 300 MVA motor generator with an ohmic heating power supply in HL-2M[J]. Plasma Science and Technology, 2013, 15(3): 300-302. doi: 10.1088/1009-0630/15/3/22 [8] 彭建飞, 宣伟民, 将宝钢, 等. HL-2M装置300MVA脉冲发电机组的设计[J]. 核聚变与等离子体物理, 2021, 41(s2):443-448. (Peng Jianfei, Xuan Weimin, Jiang Baogang, et al. Design of 300MVA motor generator on HL-2M tokamak[J]. Nuclear Fusion and Plasma Physics, 2021, 41(s2): 443-448 doi: 10.16568/j.0254-6086.2021s2002 [9] 袁保山, 姜韶风, 陆志鸿. 托卡马克装置工程基础[M]. 北京: 原子能出版社, 2011Yuan Baoshan, Jiang Shaofeng, Lu Zhihong. Engineering foundaments of tokamak devices[M]. Beijing: Atomic Energy Press, 2011 [10] 宣伟民, 王英翘, 李华俊, 等. HL-2M装置供电系统研制[J]. 核聚变与等离子体物理, 2021, 41(s2):437-442. (Xuan Weimin, Wang Yingqiao, Li Huajun, et al. Development of HL-2M power supply system[J]. Nuclear Fusion and Plasma Physics, 2021, 41(s2): 437-442 doi: 10.16568/j.0254-6086.2021s2001 -
点击查看大图
计量
- 文章访问数: 523
- HTML全文浏览量: 168
- PDF下载量: 38
- 被引次数: 0
