阵列碳纳米管的石墨化程度

马康夫; 付志兵; 易勇; 王朝阳; 程艳奎; 唐永建

doi:10.3788/HPLPB201426.022005

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名

邮箱

手机号码

标题

留言内容

验证码

阵列碳纳米管的石墨化程度

doi: 10.3788/HPLPB201426.022005

1.
中国工程物理研究院激光聚变研究中心, 四川绵阳 621 900;
2.
西南科技大学材料科学与工程学院, 四川绵阳 621 01 0

详细信息

通讯作者:
唐永建

计量
- 文章访问数: 1357
- HTML全文浏览量: 216
- PDF下载量: 183
- 被引次数: 0
出版历程
- 收稿日期: 2013-06-19
- 修回日期: 2013-11-04
- 刊出日期: 2014-02-15

Graphitization degree of carbon nanotube arrays

1.
Research Center of Laser Fusion,CAEP,Mianyang 621900,China;
2.
School of Materials Science and Engineering,Southwest University of Science and Technology,Mianyang 621010,China

摘要

摘要: 采用化学气相沉积法制备了阵列碳纳米管薄膜，对阵列碳纳米管的石墨化程度进行了系统研究。利用扫描电子显微镜(SEM)、拉曼光谱(Raman)对样品形貌以及结构进行了表征。探讨了不同实验参数对阵列碳纳米管石墨化程度影响的机理。结果发现，在一定催化剂浓度范围内，催化剂浓度过低时，阵列碳纳米管的石墨化程度较差，而随着催化剂浓度的增加，阵列碳纳米管的石墨化程度逐渐变好；生长石墨化程度较好的阵列碳纳米管需要合适的进液速度，进液速度过低或过高都会使得碳纳米管的石墨化程度变差；此外，生长石墨化程度较好的阵列碳纳米管也需要合适的生长温度，生长温度过低或过高都会使得碳纳米管的石墨化程度变差。
- 阵列碳纳米管 /
- 石墨化程度 /
- 化学气相沉积
Abstract: Aligned carbon nanotube arrays (ACNTs) were prepared by chemical vapor deposition (CVD). The graphitization degree of ACNTs was systematically investigated. The morphology and structure of the products were characterized by scanning electron microscopy (SEM) and Raman spectroscopy. The mechanism how the different experiment conditions affect the graphitization degree of ACNTs was discussed. The results indicated that the graphitization degree of ACNTs would be bad when the concentration of catalyst was too low within a certain range of catalyst concentration. And only if the flowing rate of reactant is appropriate, the graphitization degree of ACNTs will be nice. Moreover, in order to obtain a good graphitization degree of ACNTs, the growth temperature is need to control accurately.
- carbon nanotube arrays /
- graphitization degree /
- chemical vapor deposition