Design of ultrafast laser manufacturing system based on LabVIEW

Wu Zhaokui; Ma Yuncan; He Xu; Li Jun; Li Xiaoya

doi:10.11884/HPLPB201830.170312

Volume 30 Issue 3

Mar. 2018

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2018 > 30(3): 031002

Wu Zhaokui, Ma Yuncan, He Xu, et al. Design of ultrafast laser manufacturing system based on LabVIEW[J]. High Power Laser and Particle Beams, 2018, 30: 031002. doi: 10.11884/HPLPB201830.170312

Citation:

Wu Zhaokui, Ma Yuncan, He Xu, et al. Design of ultrafast laser manufacturing system based on LabVIEW[J]. High Power Laser and Particle Beams, 2018, 30: 031002. doi: 10.11884/HPLPB201830.170312

Wu Zhaokui, Ma Yuncan, He Xu, et al. Design of ultrafast laser manufacturing system based on LabVIEW[J]. High Power Laser and Particle Beams, 2018, 30: 031002. doi: 10.11884/HPLPB201830.170312

Citation:

Wu Zhaokui, Ma Yuncan, He Xu, et al. Design of ultrafast laser manufacturing system based on LabVIEW[J]. High Power Laser and Particle Beams, 2018, 30: 031002. doi: 10.11884/HPLPB201830.170312

PDF( 8784 KB)

Design of ultrafast laser manufacturing system based on LabVIEW

doi: 10.11884/HPLPB201830.170312

National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, CAEP, Mianyang 621900, China

Received Date: 2017-08-10
Rev Recd Date: 2017-10-19
Publish Date: 2018-03-15

Abstract

Abstract

An integrated ultrafast laser manufacturing system, which is based on LabVIEW software, has been designed to improve the integration level of three-dimensional translation stage controlling software and optical microscope software. This system is consisted of six units: femtosecond laser, translation stage, CCD camera, shutter, power meter, and computer. The main design idea is based on the multi-thread programming method in LabVIEW software: (1) the synchro control between the laser beam on or off and translation stage has been achieved; (2) the laser manufacturing process is monitored via a CCD camera; (3) the laser parameters such as laser average power are monitored via a power meter. And these separate modules are controlled in an integration interface. Compared with usual ultrafast laser manufacturing systems, this system has the advantages of high stability, simple operation, integrated control interface, strong scalability and high regulation efficiency.
- system integration,
- multithreading,
- LabVIEW,
- ultrafast laser,
- laser manufacturing

FullText(HTML)

References(14)

References

[1]	Halbwax M, Sarnet T, Delaporte P, et al. Micro and nano-structuration of silicon by femtosecond laser: Application to silicon photovoltaic cells fabrication[J]. Thin Solid Films, 2008, 516 (20): 6791-6795. doi: 10.1016/j.tsf.2007.12.117
[2]	Vorobyev A Y, Guo C. Direct creation of black silicon using femtosecond laser pulses[J]. Applied Surface Science, 2011, 257 (16): 7291-7294. doi: 10.1016/j.apsusc.2011.03.106
[3]	Chen T, Si J, Hou X, et al. Luminescence of black silicon fabricated by high-repetition rate femtosecond laser pulses[J]. Journal of Applied Physics, 2011, 110: 073106. doi: 10.1063/1.3641976
[4]	Liu T, Yin Y, Chen S, et al. Super-hydrophobic surfaces improve corrosion resistance of copper in seawater[J]. Electrochimica Acta, 2007, 52 (11): 3709-3713. doi: 10.1016/j.electacta.2006.10.059
[5]	Vorobyev A Y, Guo C. Direct femtosecond laser surface nano/microstructuring and its applications[J]. Laser & Photonics Reviews, 2013, 7 (3): 385-407.
[6]	Martinez A, Dubov M, Khrushchev I, et al. Direct writing of fibre Bragg gratings by femtosecond laser[J]. Electronics Letters, 2004, 40 (19): 1170-1172. doi: 10.1049/el:20046050
[7]	闫雪亮. 电子动态调控时空整形飞秒激光透明介质微通道加工[D]. 北京: 北京理工大学, 2016. Yan Xueliang. Microchannels fabrication in transparent dielectric using temporally spatially shaped femtosecond laser based on electrons dynamics control. Beijing: Beijing Institute of Technology, 2016
[8]	姜瞳. 基于飞秒激光直写微光学元件的制备及性能表征[D]. 长春: 吉林大学, 2014. Jiang Tong. The fabrication and performance characterization of micro-optical components based on femtosecond laser direct writing. Changchun: Jilin University, 2014
[9]	王文君. 飞秒激光金属加工中的形状及形貌控制研究[D]. 西安: 西安交通大学, 2008. Wang Wenjun. Study of shape and morphology control in femtosecond laser fabrication of metals. Xi'an Jiaotong University, 2008
[10]	郑崇. 飞秒激光内加工三维空腔微结构技术研究[D]. 北京: 北京工业大学, 2016. Zheng Chong. 3D Internal hollow microstructures manufactuing technology by femtosecond laser. Beijing: Beijing University of Technology, 2016
[11]	Wagner C, Armenta S, Lendl B. Developing automated analytical methods for scientific environments using LabVIEW[J]. Talanta, 2010, 80 (3): 1081-1087. doi: 10.1016/j.talanta.2009.08.018
[12]	Yang Leping, Li Haitao, Yang Lei. LabVIEW program design and application[M]. Beijing: Electrionic Industry Press, 2005.
[13]	林惠珍, 高应俊, 金重星. 基于LabVIEW的光学相干层析成像控制系统[J]. 应用光学, 2011, 32 (3): 452-455. doi: 10.3969/j.issn.1002-2082.2011.03.015 Lin Huizhen, Gao Yingjun, Jin Chongxing. Controlling system for optical coherence tomography based on LabVIEW. Journal of Applied Optics, 2011, 32 (3): 452-455 doi: 10.3969/j.issn.1002-2082.2011.03.015
[14]	张来线, 孙华燕, 樊桂花, 等. 基于LabVIEW的高性能激光主动探测控制与处理系统设计[J]. 红外与激光工程, 2013, 42 (12): 3239-3244. doi: 10.3969/j.issn.1007-2276.2013.12.015 Zhang Laixian, Sun Huayan, Fan Guihua, et al. High efficiency laser active detection controlling and processing system design based on LabVIEW. Infrared and Laser Engineering, 2013, 42 (12): 3239-3244 doi: 10.3969/j.issn.1007-2276.2013.12.015