| Citation: | Liu Dong, Shu Yu, He Weiran, et al. Heat transfer characteristics of mini pin-fin channels[J]. High Power Laser and Particle Beams, 2018, 30: 041004. doi: 10.11884/HPLPB201830.170397 |
| [1] |
刘娇, 王君涛, 周唐建, 等. 高功率平面波导激光器研究进展及分析[J]. 强激光与粒子束, 2015, 27: 061015. doi: 10.11884/HPLPB201527.061015
Liu Jiao, Wang Juntao, Zhou Tangjian, et al. Analysis and developments of high-power planar waveguide lasers. High Power Laser and Particle Beams, 2015, 27: 061015 doi: 10.11884/HPLPB201527.061015
|
| [2] |
王振国, 蒋新颖, 郑建刚, 等. 大口径端泵片状放大器的泵浦耦合系统[J]. 强激光与粒子束, 2017, 29: 091002. doi: 10.11884/HPLPB201729.170053
Wang Zhenguo, Jiang Xinying, Zheng Jiangang, et al. Coupling system for laser-diode-array end-pumped slab amplifiers. High Power Laser and Particle Beams, 2017, 29: 091002 doi: 10.11884/HPLPB201729.170053
|
| [3] |
田长青, 徐洪波, 曹宏章, 等. 高功率固体激光器冷却技术[J]. 中国激光. 2009, 36(7): 1686-1692. https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ200907012.htm
Tian Changqing, Xu Hongbo, Cao Hongzhang, et al. Cooling technology for high-power solid-state laser. Chinese Journal of Lasers, 2009, 36(7): 1686-1692 https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ200907012.htm
|
| [4] |
董延涛, 赵智刚, 刘崇, 等. 热效应对固体激光器偏振特性和基模输出特性的影响[J]. 中国激光, 2009, 36(7): 1759-1765. https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ200907028.htm
Dong Yantao, Zhao Zhigang, Liu Chong, et al. Influence of thermal effects on polarizability and output character of TEM00-mode of solid state laser. Chinese Journal of Lasers, 2009, 36(7): 1759-1765 https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ200907028.htm
|
| [5] |
徐洪波, 钱春潮, 邵双全, 等. R600a喷雾冷却系统换热过程[J]. 强激光与粒子束, 2015, 27: 071001. doi: 10.11884/HPLPB201527.071001
Xu Hongbo, Qian Chunchao, Shao Shuangquan, et al. Heat transfer process of R600a spray cooling system. High Power Laser and Particle Beams, 2015, 27: 071001 doi: 10.11884/HPLPB201527.071001
|
| [6] |
程勇, 郭延龙, 何志祝, 等. 相变散热技术在小型高效半导体抽运激光器中的应用研究[J]. 中国激光, 2016, 43: 0102005. https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201601005.htm
Cheng Yong, Guo Yanlong, He Zhizhu, et al. Application research of phase change material heat removal technology for compact high efficiency diode pumped laser. Chinese Journal of Lasers, 2016, 43: 0102005 https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201601005.htm
|
| [7] |
Xiang Jianhua, Zhang Chunliang, Jiang Fan, et al. Fabrication and testing of phase change heat sink for high power LED. Transactions of Nonferrous Metals Society of China, 2011, 21(9): 2066-2071. doi: 10.1016/S1003-6326(11)60974-6
|
| [8] |
Dixit T, Ghosh I. Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids[J]. Renewable and Sustainable Energy Reviews, 2015, 41(sC): 1298-1311.
|
| [9] |
Tuckerman D B, Pease R F W. High-performance heat sinking for VLSI[J]. IEEE Electron Device Letters, 1981, 2(5): 126-129. doi: 10.1109/EDL.1981.25367
|
| [10] |
卢鹏, 潘艳秋, 俞路, 等. 固体激光微通道冷却器内流动特性的数值模拟[J]. 强激光与粒子束, 2014, 26: 051008. doi: 10.11884/HPLPB201426.051008
Lu Peng, Pan Yanqiu, Yu Lu, et al. Numerical simulation of flow characteristic in solid-state laser microchannel cooler. High Power Laser and Particle Beams, 2014, 26: 051008 doi: 10.11884/HPLPB201426.051008
|
| [11] |
刘东, 蒋斌, 陈飞. 微方肋冷却系统的换热特性[J]. 强激光与粒子束, 2013, 25(2): 335-340. doi: 10.3788/HPLPB20132502.0335
Liu Dong, Jiang Bin, Chen Fei. Heat transfer characteristics of micro-fin cooling system. High Power Laser and Particle Beams, 2013, 25(2): 335-340 doi: 10.3788/HPLPB20132502.0335
|
| [12] |
Peng X F, Peterson G P. Convective heat transfer and flow friction for water flow in microchannel structures[J]. International Journal of Heat & Mass Transfer, 1996, 39(12): 2599-2608.
|
| [13] |
Peng X F, Peterson G P. The effect of thermofluid and geometrical parameters on convection of liquids through rectangular microchannels[J]. International Journal of Heat & Mass Transfer, 1995, 38(4): 755-758.
|
| [14] |
Kim B. An experimental study on fully developed laminar flow and heat transfer in rectangular microchannels[J]. International Journal of Heat and Fluid Flow, 2016, 62: 224-232. doi: 10.1016/j.ijheatfluidflow.2016.10.007
|
| [15] |
潘娜娜, 潘艳秋, 俞路, 等. 微通道冷却器内流动和传热特性的数值模拟[J]. 强激光与粒子束, 2016, 28: 021002. doi: 10.11884/HPLPB201628.021002
Pan Nana, Pan Yanqiu, Yu Lu, et al. Numerical simulation of flow and heat transfer characteristics in microchannel cooler. High Power Laser and Particle Beams, 2016, 28: 021002 doi: 10.11884/HPLPB201628.021002
|
| [16] |
郭春海, 陈希良, 杨旸, 等. 微通道换热器的数值模拟和结构优化[J]. 计算机辅助工程, 2015, 24(4): 61-67. doi: 10.13340/j.cae.2015.04.013
Guo Chunhai, Chen Xiliang, Yang Yang, et al. Numerical simulation and structural optimization on microchannel heat exchangers. Computer Aided Engineering, 2015, 24(4): 61-67 doi: 10.13340/j.cae.2015.04.013
|
| [17] |
刘东, 蒋斌. 结构形式对微槽内流动换热特性的影响[J]. 激光与光电子学进展, 2013, 50: 041202. https://www.cnki.com.cn/Article/CJFDTOTAL-JGDJ201304016.htm
Liu Dong, Jiang Bin. Effect of channel structures on the fluid flow and heat transfer in micro-channels. Laser & Optoelectronics Progress, 2013, 50: 041202 https://www.cnki.com.cn/Article/CJFDTOTAL-JGDJ201304016.htm
|
| [18] |
Liu D, Liu M, Xing D, et al. Flow and heat transfer performance of a mini-channel radiator with cylinder disturbed flow[J]. Experimental Thermal & Fluid Science, 2011, 35(6): 1202-1208.
|
| [19] |
Liu Minghou, Liu Dong, Xu Sheng, et al. Experimental study on liquid flow and heat transfer in micro square pin fin heat sink[J]. International Journal of Heat and Mass Transfer, 2011, 54(25): 5602-5611.
|
| [20] |
刘东, 蒋斌, 刘明侯. 进出口方式对槽道流体分配和换热的影响[J]. 中国激光, 2012, 39: 1003005. https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201210010.htm
Liu Dong, Jiang Bin, Liu Minghou. Inlet/outlet arrangement effect on the flow distribution and heat transfer in mini-channels. Chinese Journal of Lasers, 2012, 39: 1003005 https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201210010.htm
|