Volume 31 Issue 3
Mar.  2019
Turn off MathJax
Article Contents
Liang Jing, Dong Lan, Wang Tong, et al. Application of close-range photogrammetry to particle accelerator alignment[J]. High Power Laser and Particle Beams, 2019, 31: 035102. doi: 10.11884/HPLPB201931.180333
Citation: Liang Jing, Dong Lan, Wang Tong, et al. Application of close-range photogrammetry to particle accelerator alignment[J]. High Power Laser and Particle Beams, 2019, 31: 035102. doi: 10.11884/HPLPB201931.180333

Application of close-range photogrammetry to particle accelerator alignment

doi: 10.11884/HPLPB201931.180333
  • Received Date: 2018-11-20
  • Rev Recd Date: 2019-02-21
  • Publish Date: 2019-03-15
  • This paper presents the first time application of close-range photogrammetry to control net and components measurement in domestic particle accelerator facilities. A detailed measurement scheme is formulated to meet the narrow space of the tunnel, two kind of targets are designed (the hemisphere target and five plane faces target) and an idea is put forward to make the planar coded targets into a three dimensional group to satisfy the tunnel condition. Besides short baseline of a standard bar, long baseline based on laser tracker was also added for constraint. A measurement experiment was conducted in the 70 m long tunnel which is a part of RCS in CSNS, and the coordinates of the control points and the components are successfully obtained, the accuracy was 0.5 mm as compared with that of the laser tracker. This photogrammetric method has remarkably improved efficiency and achieved good result as expected.
  • loading
  • [1]
    王之卓. 摄影测量原理[M]. 武汉: 武汉大学出版社, 2007.

    Wang Zhizhuo. Principles of photogrammetry. Wuhan: Wuhan University Press, 2007
    [2]
    冯文灏. 近景摄影测量[M]. 武汉: 武汉大学出版社, 2002.

    Feng Wenhao. Close range photogrammetry. Wuhan: Wuhan University Press, 2002
    [3]
    范生宏. 工业数字摄影测量中人工标志的研究与应用[D]. 郑州: 解放军信息工程大学, 2006.

    Fan Shenghong. A study and application of targets in industrial digital photogrammetry. Zhengzhou: The PLA Information Engineering University, 2006
    [4]
    范生宏, 黄桂平, 陈继华, 等. Canny算子对人工标志中心的亚像素精度定位[J]. 测绘科学技术学报, 2006, 23(1): 76-78. https://www.cnki.com.cn/Article/CJFDTOTAL-JFJC200601022.htm

    Fan Shenghong, Huang Guiping, Chen Jihua, et al. Subpixel accuracy artificial target location using Canny operator. Journal of Geomatics Science and Technology, 2006, 23(1): 76-78 https://www.cnki.com.cn/Article/CJFDTOTAL-JFJC200601022.htm
    [5]
    轩亚兵. 工业摄影测量中光学投点器的性能研究与应用[D]. 郑州: 华北水利水电大学, 2017.

    Xuan Yabing. Performance research and application of optical targets projector for industrial photogrammetry. Zhengzhou: North China University of Water Resources and Electric Power, 2017
    [6]
    王小龙, 董岚, 李波, 等. BEPCⅡ储存环的预准直[J]. 核技术, 2010, 33(8): 566-570. https://www.cnki.com.cn/Article/CJFDTOTAL-HJSU201008003.htm

    Wang Xiaolong, Dong Lan, Li Bo, et al. The pre-alignment of the BEPCⅡ. Nuclear Techniques, 2010, 33(8): 566-570 https://www.cnki.com.cn/Article/CJFDTOTAL-HJSU201008003.htm
    [7]
    梁静, 董岚, 罗涛, 等. BEPCⅡ储存环激光跟踪仪测量精度统计及先验误差的确定[J]. 测绘科学, 2013, 38(6): 182-184. https://www.cnki.com.cn/Article/CJFDTOTAL-CHKD201306063.htm

    Liang Jing, Dong Lan, Luo Tao, et al. Precision statistics of laser tracker in BEPCⅡ. Science of Surveying and Mapping, 2013, 38(6): 182-184 https://www.cnki.com.cn/Article/CJFDTOTAL-CHKD201306063.htm
    [8]
    马娜, 董岚, 梁静, 等. 中国散裂中子源隧道控制网测量方法及精度探讨[J]. 核科学与工程, 2018, 38(3): 411-416. doi: 10.3969/j.issn.0258-0918.2018.03.011

    Ma Na, Dong Lan, Liang Jing, et al. Measurement of the tunnel control network of CSNS and accuracy research. Nuclear Science and Engineering, 2018, 38(3): 411-416 doi: 10.3969/j.issn.0258-0918.2018.03.011
    [9]
    娄铮, 钱元, 范生宏, 等. 基于数字摄影测量技术的高精度低温面形测量[J]. 天文学报, 2016, 57(1): 115-124. https://www.cnki.com.cn/Article/CJFDTOTAL-TWXB201601011.htm

    Lou Zheng, Qian Yuan, Fan Shenghong, et al. High-precision photogrammetric surface figure measurements under cryogenic environment. Acta Astronomica Sinica, 2016, 57(1): 115-124 https://www.cnki.com.cn/Article/CJFDTOTAL-TWXB201601011.htm
    [10]
    马彤彤, 马开锋, 张琳伟, 等. 大型盾构机盾体检测技术研究[J]. 矿山机械, 2018, 46(5): 15-18. https://www.cnki.com.cn/Article/CJFDTOTAL-KSJX201805003.htm

    Ma Tongtong, Ma Kaifeng, Zhang Lin-wei, et al. Research on detection technology for body of large shield machine. Mining & Processing Equipment, 2018, 46(5): 15-18 https://www.cnki.com.cn/Article/CJFDTOTAL-KSJX201805003.htm
    [11]
    张杰, 范生宏, 刘昌儒, 等. 空间后方交会精度分析及实验验证[J]. 无线电工程, 2015(12): 59-63. https://www.cnki.com.cn/Article/CJFDTOTAL-WXDG201512016.htm

    Zhang Jie, Fan Shenghong, Liu Changru, et al. Analysis and verification of single image space resection precision. Radio Engineering, 2015(12): 59-63 https://www.cnki.com.cn/Article/CJFDTOTAL-WXDG201512016.htm
    [12]
    马彤彤, 轩亚兵, 王伟峰, 等. 双相机工业摄影测量系统精度影响几何因素测评[J]. 宇航计测技术, 2017, 37(6): 28-34. https://www.cnki.com.cn/Article/CJFDTOTAL-YHJJ201706006.htm

    Ma Tongtong, Xuan Yabing, Wang Weifeng, et al. Evaluation on accuracy influence factor of dual camera industrial photogrammetric system. Journal of Astronautic Metrology and Measurement, 2017, 37(6): 28-34 https://www.cnki.com.cn/Article/CJFDTOTAL-YHJJ201706006.htm
    [13]
    冯其强. 数字工业摄影测量技术研究与实践[D]. 郑州: 解放军信息工程大学, 2010.

    Feng Qiqiang. Research and practice of digital industrial photogrametry. Zhengzhou: The PLA Information Engineering University, 2010
    [14]
    邾继贵, 于之靖. 视觉测量原理与方法[M]. 北京: 机械工业出版社, 2011.

    Zhu Jigui, Yu Zhijing. The principle of vision metrology. Beijing: China Machine Press, 2011
    [15]
    黄桂平. 数字近景工业摄影测量理论、方法与应用[M]. 北京: 科学出版社, 2016.

    Huang Guiping. Theory, method and application of digital close range industrial photogrametry. Beijing: Science Press, 2016
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(10)  / Tables(1)

    Article views (1208) PDF downloads(64) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return