Performance analysis and development of high-power and high-linearity current injection probes

Sun Jiangning; Pan Xiaodong; Lu Xinfu; Wan Haojiang; Wei Guanghui

doi:10.11884/HPLPB202133.200350

Volume 33 Issue 5

May 2021

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2021 > 33(5): 053008

Sun Jiangning, Pan Xiaodong, Lu Xinfu, et al. Performance analysis and development of high-power and high-linearity current injection probes[J]. High Power Laser and Particle Beams, 2021, 33: 053008. doi: 10.11884/HPLPB202133.200350

Citation:

Sun Jiangning, Pan Xiaodong, Lu Xinfu, et al. Performance analysis and development of high-power and high-linearity current injection probes[J]. High Power Laser and Particle Beams, 2021, 33: 053008. doi: 10.11884/HPLPB202133.200350

Citation:

PDF( 1724 KB)

Performance analysis and development of high-power and high-linearity current injection probes

doi: 10.11884/HPLPB202133.200350

National Key Laboratory on Electromagnetic Environment Effects, Shijiazhuang Campus of Army Engineering University, Shijiazhuang 050003, China

Received Date: 2020-12-24
Rev Recd Date: 2021-04-27

Available Online: 2021-05-15

Publish Date: 2021-05-20

Abstract

Abstract

Aiming at the problem that the impedance of the probe is prone to non-linear changes when applied to the bulk current injection test replacing high field intensity radiation, the linearity test of the existing commercial current probe is carried out by analyzing the method of large current injection. The test results show that as the injected power increases, the linearity error at different frequencies also increases. A plan for the development of a high-power and high-linearity current probe was proposed, and the probe was developed and passed the test. The self-developed current injection probe has a maximum withstand power of 500 W. The insertion loss varies with the injected power and has good linearity (0.3 dB @ 1−500 W). The probe can meet the technical requirements of carrying out bulk current injection (equivalent high field electromagnetic radiation effect) test.
- current injection probe,
- high power,
- high linearity,
- nonlinear change,
- electromagnetic radiation

FullText(HTML)

References(16)

References

[1]	Flavia G, Sergio A P. Bulk current injection in twisted wire pairs with not perfectly balanced terminations[J]. IEEE Transactions on Electromagnetic Compatibility, 2013, 55(6): 1293-1301. doi: 10.1109/TEMC.2013.2255295
[2]	马伟明. 电力电子系统中的电磁兼容[M]. 武汉: 武汉水利水电大学出版社, 1999. Ma Weiming. Electromagnetic compatibility in power electronic systems[M]. Wuhan: Wuhan University of Water Resources and Hydropower Press, 1999
[3]	钱照明, 程肇基. 电磁兼容设计基础及干扰抑制技术[M]. 杭州: 浙江大学出版社, 2000. Qian Zhaoming, Cheng Zhaoji. Design basis of electromagnetic compatibility and interference suppression technology[M]. Hangzhou: Zhejiang University Press, 2000
[4]	Kojovic L. PCB Rogowski coils benefit relay protection[J]. IEEE Computer Applications in Power, 2002, 15(3): 50-53. doi: 10.1109/MCAP.2002.1018823
[5]	Kojovic L. Rogowski coils suit relay protection and measurement[J]. IEEE Computer Applications in Power, 1997, 10(3): 47-52. doi: 10.1109/67.595293
[6]	Flavia G, Giordano S, Sergio A P. The concept of weak imbalance and its role in the emissions and immunity of differential lines[J]. IEEE Transactions on Electromagnetic Compatibility, 2013, 55(6): 1346-1349. doi: 10.1109/TEMC.2013.2261302
[7]	谭伟, 高本庆, 刘波. EMC测试中的电流注入技术[J]. 测试与测量, 2003(4):19-22. (Tan Wei, Gao Benqing, Liu Bo. The advances in development of current injection methods for EMC testing[J]. Testing and Measurement, 2003(4): 19-22
[8]	杨茂松, 孙永卫, 潘晓东, 等. 双绞线BCI等效替代强场电磁辐射实验研究[J]. 微波学报, 2018, 34(6):72-77. (Yang Maosong, Sun Yongwei, Pan Xiaodong, et al. Testing technology of using twisted pair cable BCI as substitution for high field continuous wave EM radiation[J]. Journal of Microwaves, 2018, 34(6): 72-77
[9]	魏光辉, 卢新福, 潘晓东. 强场电磁辐射效应测试方法研究进展与发展趋势[J]. 高电压技术, 2016, 42(5):1347-1355. (Wei Guanghui, Lu Xinfu, Pan Xiaodong. Recent progress and development in test methods for high intensity electromagnetic field radiation effect[J]. High Voltage Engineering, 2016, 42(5): 1347-1355
[10]	潘晓东, 魏光辉, 卢新福, 等. 差模定向注入等效替代强电磁脉冲辐射效应实验方法[J]. 电波科学学报, 2017, 32(2):151-160. (Pan Xiaodong, Wei Guanghui, Lu Xinfu, et al. Test method of using differential mode injection as a substitute for high intensity electromagnetic pulse radiation[J]. ChinesE Journal of Radio Science, 2017, 32(2): 151-160
[11]	孙永卫, 杨茂松, 潘晓东, 等. 大电流注入探头对电磁辐射敏感性研究的影响[J]. 北京理工大学学报, 2020, 40(12):1362-1368. (Sun Yongwei, Yang Maosong, Pan Xiaodong, et al. Influence of bulk current injection probe on electromagnetic radiation sensitivity research[J]. Transactions of Beijing Institute of Technology, 2020, 40(12): 1362-1368
[12]	杨茂松, 孙永卫, 潘晓东, 等. 平行双线BCI等效替代强场连续波电磁辐射实验研究[J]. 强激光与粒子束, 2018, 30:093201. (Yang Maosong, Sun Yongwei, Pan Xiaodong, et al. Testing technology of using bulk current injection with parallel double line as substitute for high field continuous wave electromagnetic radiation[J]. High Power Laser and Particle Beams, 2018, 30: 093201 doi: 10.11884/HPLPB201830.180078
[13]	潘晓东, 魏光辉, 卢新福, 等. 电磁注入等效替代辐照理论模型及实现技术[J]. 高电压技术, 2012, 38(9):2293-2301. (Pan Xiaodong, Wei Guanghui, Lu Xinfu, et al. Equivalent surrogate irradiation theoretical model and realization technology of electromagnetic injection[J]. High Voltage Technology, 2012, 38(9): 2293-2301
[14]	MIL-STD-461C, Requirements for the control of electromagnetic interference characteristics of subsystems and equipment[S]. 2001.
[15]	GJB151B, 军用设备和分系统电磁发射和敏感度要求与测量[S]. 2013. GJB151B, Electromagnetic emission and susceptibility requirements and measurements for military and subsystems. 2013
[16]	ED-107, Guide to certification of aircraft in a high-intensity radiated field (HIRF) environment[S]. 2010.