Multi-pulses ablation threshold of Ni-based superalloy irradiated by ultrafast laser with different pulse duration

Gao Yun; Yang Zenan; Song Chengwei; Zhang Yuanhang; Zhang Jian; Zhang Qinghua; Liu Mincai; Li Yaguo

doi:10.11884/HPLPB202234.210341

Volume 34 Issue 4

Mar. 2022

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2022 > 34(4): 041005

Gao Yun, Yang Zenan, Song Chengwei, et al. Multi-pulses ablation threshold of Ni-based superalloy irradiated by ultrafast laser with different pulse duration[J]. High Power Laser and Particle Beams, 2022, 34: 041005. doi: 10.11884/HPLPB202234.210341

Citation:

Gao Yun, Yang Zenan, Song Chengwei, et al. Multi-pulses ablation threshold of Ni-based superalloy irradiated by ultrafast laser with different pulse duration[J]. High Power Laser and Particle Beams, 2022, 34: 041005. doi: 10.11884/HPLPB202234.210341

Citation:

PDF( 8474 KB)

Multi-pulses ablation threshold of Ni-based superalloy irradiated by ultrafast laser with different pulse duration

doi: 10.11884/HPLPB202234.210341

1.
Fine Optical Engineering Research Center, Chengdu 610041, China
2.
Science and Technology on Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials, Bejing 100095, China
3.
Laser Fusion Research Center, CAEP, Mianyang 621900, China

Received Date: 2021-08-04
Rev Recd Date: 2022-01-11

Available Online: 2022-02-14

Publish Date: 2022-03-19

Abstract

Abstract

The effects of the laser pulse duration and the number of pulses on the ablation threshold of Ni-based superalloy were experimentally investigated. In this experiment, Ni-based superalloy samples were irradiated by 1, 10, 50, 100, 300, 500 and 1000 laser pulses with different pulse duration, respectively, and pulse duration 290 fs, 1 ps and 7 ps were explored. The diameter of ablation holes expands with the increase of laser pulse and the effect of pulse number on the diameter of ablation holes increases with the pulse duration from the experiments. By analyzing the relationship between the diameter of ablation holes and laser pulse energy, multi-pulse ablation threshold of Ni-based superalloy irradiated by ultrafast laser with different pulse duration can be obtained. No matter what the pulse duration of the laser was, the incubation effects of multi-pulse irradiation on the surface of the superalloy were significant. And the incubation coefficient for the thresholds calculated by diameter respectively in 290 fs, 1 ps, and 7 ps is fitted to be 0.88, 0.86 and 0.78.
- ultrafast laser,
- superalloy,
- multi-pulses irradiation,
- ablation threshold,
- incubation effects

FullText(HTML)

References(26)

References

[1]	周明, 杨青峰, 张洪玉. 航空涡轮叶片气膜冷却孔激光加工技术进展[J]. 中国基础科学, 2016, 18(5):35-42. (Zhou Ming, Yang Qingfeng, Zhang Hongyu. Advances in laser fabrication of the aeroengine blades' film cooling holes[J]. China Basic Science, 2016, 18(5): 35-42 doi: 10.3969/j.issn.1009-2412.2016.05.004
[2]	张晓兵. 激光加工涡轮叶片气膜孔的现状及发展趋势[J]. 应用激光, 2002, 22(2):227-229,246. (Zhang Xiaobing. The present state and perspective of laser drilling technology in turbine blades[J]. Applied Laser, 2002, 22(2): 227-229,246 doi: 10.3969/j.issn.1000-372X.2002.02.039
[3]	Bandyopadhyay S, Sundar J K S, Sundararajan G, et al. Geometrical features and metallurgical characteristics of Nd: YAG laser drilled holes in thick IN718 and Ti–6Al–4V sheets[J]. Journal of Materials Processing Technology, 2002, 127(1): 83-95. doi: 10.1016/S0924-0136(02)00270-4
[4]	刘丹, 孔德新, 苗在强, 等. 钛合金纳秒激光打孔数值模拟和实验研究[J]. 强激光与粒子束, 2018, 30:069001. (Liu Dan, Kong Dexin, Miao Zaiqiang, et al. Simulation and experimental investigation on nano-second pulsed laser drilling of titanium alloy[J]. High Power Laser and Particle Beams, 2018, 30: 069001 doi: 10.11884/HPLPB201830.170386
[5]	Ancona A, Döring S, Jauregui C, et al. Femtosecond and picosecond laser drilling of metals at high repetition rates and average powers[J]. Optics Letters, 2009, 34(21): 3304-3306. doi: 10.1364/OL.34.003304
[6]	Zhang Wei, Cheng Guanghua, Feng Qiang, et al. Femtosecond laser machining characteristics in a single-crystal superalloy[J]. Rare Metals, 2011, 30(s1): 639-642. doi: 10.1007/s12598-011-0362-z
[7]	Kerse C, Kalaycıoğlu H, Elahi P, et al. Ablation-cooled material removal with ultrafast bursts of pulses[J]. Nature, 2016, 537(7618): 84-88. doi: 10.1038/nature18619
[8]	纪亮, 张晓兵, 张伟, 等. DD6镍基单晶合金的纳秒及皮秒激光烧蚀和制孔研究[J]. 应用激光, 2014, 34(6):551-556. (Ji Liang, Zhang Xiaobing, Zhang Wei, et al. Laser-induced ablation and laser drilling of DD6 nickel-based single-crystal alloy by nanosecond and picosecond lasers[J]. Applied Laser, 2014, 34(6): 551-556 doi: 10.3788/AL20143406.551
[9]	Petronić S, Milosavljević A, Radaković Z, et al. Analysis of geometrical characteristics of pulsed ND: YAG laser drilled holes in superalloy Nimonic 263 sheets[J]. Tehnički Vjesnik, 2010, 17(1): 61-66.
[10]	Das D K, Pollock T M. Femtosecond laser machining of cooling holes in thermal barrier coated CMSX4 superalloy[J]. Journal of Materials Processing Technology, 2009, 209(15/16): 5661-5668.
[11]	Weck A, Crawford T H R, Wilkinson D S, et al. Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond and nanosecond pulses[J]. Applied Physics A, 2008, 90(3): 537-543. doi: 10.1007/s00339-007-4300-6
[12]	Kirkwood S E, van Popta A C, Tsui Y Y, et al. Single and multiple shot near-infrared femtosecond laser pulse ablation thresholds of copper[J]. Applied Physics A, 2005, 81(4): 729-735. doi: 10.1007/s00339-004-3135-7
[13]	Mannion P T, Magee J, Coyne E, et al. The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in air[J]. Applied Surface Science, 2004, 233(1/4): 275-287.
[14]	Di Niso F, Gaudiuso C, Sibillano T, et al. Influence of the repetition rate and pulse duration on the incubation effect in multiple-shots ultrafast laser ablation of steel[J]. Physics Procedia, 2013, 41: 698-707. doi: 10.1016/j.phpro.2013.03.136
[15]	Le Harzic R, Breitling D, Weikert M, et al. Ablation comparison with low and high energy densities for Cu and Al with ultra-short laser pulses[J]. Applied Physics A, 2005, 80(7): 1589-1593. doi: 10.1007/s00339-005-3206-4
[16]	Feng Q, Picard Y N, Liu H, et al. Femtosecond laser micromachining of a single-crystal superalloy[J]. Scripta Materialia, 2005, 53(5): 511-516. doi: 10.1016/j.scriptamat.2005.05.006
[17]	Semaltianos N G, Perrie W, French P, et al. Femtosecond laser ablation characteristics of nickel-based superalloy C263[J]. Applied Physics A, 2009, 94(4): 999-1009. doi: 10.1007/s00339-008-4885-4
[18]	Semaltianos N G, Perrie W, Cheng J, et al. Picosecond laser ablation of nickel-based superalloy C263[J]. Applied Physics A, 2010, 98(2): 345-355. doi: 10.1007/s00339-009-5399-4
[19]	Miotello A, Kelly R. Laser-induced phase explosion: new physical problems when a condensed phase approaches the thermodynamic critical temperature[J]. Applied Physics A, 1999, 69(7): S67-S73. doi: 10.1007/s003390051357
[20]	李莉, 张端明, 房然然, 等. 飞秒多脉冲激光烧蚀金属过程中的能量剩余现象[J]. 强激光与粒子束, 2009, 21(11):1671-1676. (Li Li, Zhang Duanming, Fang Ranran, et al. Residual energy in femtosecond multipulse laser ablation of metal[J]. High Power Laser and Particle Beams, 2009, 21(11): 1671-1676
[21]	Byskov-Nielsen J, Savolainen J M, Christensen M S, et al. Ultra-short pulse laser ablation of metals: threshold fluence, incubation coefficient and ablation rates[J]. Applied Physics A, 2010, 101(1): 97-101. doi: 10.1007/s00339-010-5766-1
[22]	陈安民, 姜远飞, 刘航, 等. 双温方程用于飞秒激光烧蚀金属的模拟分析[J]. 激光与红外, 2012, 42(8):847-851. (Chen Anming, Jiang Yuanfei, Liu Hang, et al. Numerical simulation of femtosecond laser ablation by two-temperature model[J]. Laser & Infrared, 2012, 42(8): 847-851 doi: 10.3969/j.issn.1001-5078.2012.08.001
[23]	邓素辉, 陶向阳, 刘明萍, 等. 飞秒-纳秒脉冲激光烧蚀金属热效应分析[J]. 激光技术, 2007, 31(1):4-7. (Deng Suhui, Tao Xiangyang, Liu Mingping, et al. Thermal analysis of metal ablation by means of femtosecond-to-nanosecond laser pulses[J]. Laser Technology, 2007, 31(1): 4-7 doi: 10.3969/j.issn.1001-3806.2007.01.024
[24]	Ni Xiaocheng, Wang C Y, Yang Li, et al. Parametric study on femtosecond laser pulse ablation of Au films[J]. Applied Surface Science, 2006, 253(3): 1616-1619. doi: 10.1016/j.apsusc.2006.02.053
[25]	邵俊峰, 郭劲, 王挺峰. 飞秒双脉冲激光照射金属薄膜的热行为[J]. 强激光与粒子束, 2014, 26:091017. (Shao Junfeng, Guo Jin, Wang Tingfeng. Thermal behavior of metal thin film irradiated by femtosecond double-pulse laser[J]. High Power Laser and Particle Beams, 2014, 26: 091017 doi: 10.11884/HPLPB201426.091017
[26]	Harilal S S, Diwakar P K, Hassanein A. Electron-ion relaxation time dependent signal enhancement in ultrafast double-pulse laser-induced breakdown spectroscopy[J]. Applied Physics Letters, 2013, 103: 041102. doi: 10.1063/1.4816348