Circuit modeling and analysis of kA level pulse current injection probe

Dong Yayun; Cui Zhitong; Cheng Yinhui; Qin Feng; Nie Xin

doi:10.11884/HPLPB202234.210565

Volume 34 Issue 9

Jun. 2022

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2022 > 34(9): 095013

Dong Yayun, Cui Zhitong, Cheng Yinhui, et al. Circuit modeling and analysis of kA level pulse current injection probe[J]. High Power Laser and Particle Beams, 2022, 34: 095013. doi: 10.11884/HPLPB202234.210565

Citation:

Dong Yayun, Cui Zhitong, Cheng Yinhui, et al. Circuit modeling and analysis of kA level pulse current injection probe[J]. High Power Laser and Particle Beams, 2022, 34: 095013. doi: 10.11884/HPLPB202234.210565

Citation:

PDF( 1227 KB)

Circuit modeling and analysis of kA level pulse current injection probe

doi: 10.11884/HPLPB202234.210565

State Key Laboratory of Intense Pulsed Radiation Simulation and Effect, Northwest Institute of Nuclear Technology, Xi’an 710024, China

Received Date: 2021-12-20
Rev Recd Date: 2022-05-15

Available Online: 2022-05-21

Publish Date: 2022-06-17

Abstract

Abstract

To meet the application requirement of kA level pulse current injection, a kind of current injection probe based on amorphous magnetic core is designed. Then the circuit model is established based on the injection probe structure, and the model parameter values, frequency domain and time domain are verified by the particle swarm optimization algorithm. Finally, the performance difference between the kA level injection probe and the traditional injection probe (FCC-120-6A) is analyzed.
- pulsed current injection,
- kA level,
- amorphous core,
- current injection probe,
- inductive coupling

FullText(HTML)

References(17)

References

[1]	毛从光, 程引会, 谢彦召. 高空电磁脉冲技术基础[M]. 北京: 科学出版社, 2019 Mao Congguang, Chen Yinhui, Xie Yanzhao. Technical basis of high altitude electromagnetic pulse[M]. Beijing: Science Press, 2019
[2]	Benford J, Swegle J A, Schamiloglu E. High power microwaves[M]. 2nd ed. New York: Taylor & Francis, 2007.
[3]	崔志同. HEMP脉冲电流注入的仿真与实验研究[D]. 西安: 西安电子科技大学, 2020 Cui Zhitong. Simulation and experimental research on HEMP pulsed current injection[D]. Xi'an: Xidian University, 2020
[4]	GJB 8848-2016, 系统电磁环境效应试验方法[S] GJB 8848-2016, Electromagnetic environmental effects test methods for systems[S]
[5]	李云, 静广宇. GJB 8848应用于运载火箭的试验方法探讨[J]. 安全与电磁兼容, 2020(1):41-45. (Li Yun, Jing Guangyu. Discussion on the test method of GJB 8848 applied to launch vehicle[J]. Safety & EMC, 2020(1): 41-45 Li Yun, Jing Guangyu. Discussion on the test method of GJB 8848 applied to launch vehicle[J]. Safety & EMC, 2020(1): 41-45
[6]	秦锋, 周辉, 毛从光, 等. 纳秒级脉冲电流下铁氧体磁环饱和特性[J]. 高电压技术, 2017, 43(10):3381-3386. (Qin Feng, Zhou Hui, Mao Congguang, et al. Saturation characteristics of ferrite beads impacted by the nanosecond's current pulse[J]. High Voltage Engineering, 2017, 43(10): 3381-3386 Qin Feng, Zhou Hui, Mao Congguang, et al. Saturation characteristics of ferrite beads impacted by the nanosecond's current pulse[J]. High Voltage Engineering, 2017, 43(10): 3381-3386
[7]	秦锋, 周辉, 崔志同. 磁环的HEMP传导特性实验[J]. 现代应用物理, 2016, 7:040602. (Qin Feng, Zhou Hui, Cui Zhitong. Experimental study on HEMP conduction properties of magnetic rings[J]. Modern Applied Physics, 2016, 7: 040602 Qin Feng, Zhou Hui, Cui Zhitong. Experimental study on HEMP conduction properties of magnetic rings[J]. Modern Applied Physics, 2016, 7: 040602
[8]	张国伟, 丛培天, 乔开来, 等. 脉冲磁化条件下非晶磁芯的损耗特性[J]. 强激光与粒子束, 2012, 24(5):1247-1250. (Zhang Guowei, Cong Peitian, Qiao Kailai, et al. Loss characteristics of glassy alloy magnetic core under pulsed magnetization[J]. High Power Laser and Particle Beams, 2012, 24(5): 1247-1250 doi: 10.3788/HPLPB20122405.1247 Zhang Guowei, Cong Peitian, Qiao Kailai, et al. Loss characteristics of glassy alloy magnetic core under pulsed magnetization[J]. High Power Laser and Particle Beams, 2012, 24(5): 1247-1250 doi: 10.3788/HPLPB20122405.1247
[9]	崔志同, 毛从光, 孙蓓云. 感性脉冲电流注入装置的SPICE电路建模[J]. 电子学报, 2017, 45(6):1513-1517. (Cui Zhitong, Mao Congguang, Sun Beiyun. SPICE modeling of pulsed current injection with inductive coupling[J]. Acta Electronica Sinica, 2017, 45(6): 1513-1517 doi: 10.3969/j.issn.0372-2112.2017.06.033 Cui Zhitong, Mao Congguang, Sun Beiyun. SPICE modeling of pulsed current injection with inductive coupling[J]. Acta Electronica Sinica, 2017, 45(6): 1513-1517 doi: 10.3969/j.issn.0372-2112.2017.06.033
[10]	Grassi F. Accurate modeling of ferrite-core effects in probes for bulk current injection[C]//Proceedings of 2009 IEEE International Conference on Microwaves, Communications, Antennas and Electronics Systems. Tel Aviv, Israel: IEEE, 2009: 1-6.
[11]	Grassi F, Spadacini G, Pignari S A. SPICE behavioral modeling of RF current injection in wire bundles[J]. IEICE Transactions on Communications, 2014, E97.B(2): 424-431. doi: 10.1587/transcom.E97.B.424
[12]	Grassi F, Marliani F, Pignari S A. SPICE modeling of BCI probes accounting for the frequency-dependent behavior of the ferrite core[C]//Proceedings of the 19th General Assembly of International Union of Radio Science. Chicago, USA: IEEE, 2008: 120-125.
[13]	刘波. 粒子群优化算法及其工程应用[M]. 北京: 电子工业出版社, 2010: 26-39 Liu Bo. Particle swarm optimization algorithm and its engineering applications[M]. Beijing: Electronic Industry Press, 2010: 26-39
[14]	Kennedy J, Eberhart R C, Shi Yuhui. Swarm intelligence: a volume in the Morgan Kaufmann series in artificial intelligence[M]. San Francisco: Morgan Kaufmann Publishers, 2001.
[15]	Kennedy J, Eberhart R. Particle swarm optimization[C]//Proceedings of International Conference on Neural Networks. Perth: IEEE, 1995: 1942-1948.
[16]	刘开丽. 粒子群优化算法的研究与应用[D]. 合肥: 安徽大学, 2013 Liu Kaili. Research and application of particle swarm optimization algorithm[D]. Hefei: Anhui University, 2013
[17]	Eberhart R C, Shi Yuhui. Particle swarm optimization: developments, applications and resources[C]//Proceedings of 2001 Congress on Evolutionary Computation. Seoul: IEEE, 2001: 81-86.