Structure design and simulation research for the water-cooled solenoid with  1.5 T magnetic field

Ye Yi; Long Quanhong; Liao Shuqing; Liu Yunlong; Li Mingwei

doi:10.11884/HPLPB202335.220016

Volume 35 Issue 2

Jan. 2023

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2023 > 35(2): 024003

Ye Yi, Long Quanhong, Liao Shuqing, et al. Structure design and simulation research for the water-cooled solenoid with 1.5 T magnetic field[J]. High Power Laser and Particle Beams, 2023, 35: 024003. doi: 10.11884/HPLPB202335.220016

Citation:

Ye Yi, Long Quanhong, Liao Shuqing, et al. Structure design and simulation research for the water-cooled solenoid with 1.5 T magnetic field[J]. High Power Laser and Particle Beams, 2023, 35: 024003. doi: 10.11884/HPLPB202335.220016

Citation:

PDF( 9008 KB)

Structure design and simulation research for the water-cooled solenoid with 1.5 T magnetic field

doi: 10.11884/HPLPB202335.220016

Institute of Fluid Physics, CAEP, Mianyang 621900, China

Received Date: 2022-01-22
Accepted Date: 2022-10-11
Rev Recd Date: 2022-09-14

Available Online: 2022-10-17

Publish Date: 2023-01-14

Abstract

Abstract

The structure design and simulation research for the water-cooled solenoid with magnetic field on the order of T are presented in this paper. The multi-layer water-cooled structure design is used for the solenoid. The solenoid structure malformation caused by different temperature rise is simulated and checked. Finally the magnetic field is calculated by POISSON code. The structure deformation is less than 0.07 mm with 60 ℃ temperature rise and the magnetic field is 1.5 T with 96.6 A current.The axial magnetic field region is 40 mm on the order of 0.01% precision and is 140 mm on the order of 0.1% precision. The results show that the water-cooled solenoid is good enough for the magnetic field calibration measurement.
- water-cooled,
- solenoid,
- calibration

FullText(HTML)

References(9)

References

[1]	陈继忠, 张一鸣, 肖继军. 低场核磁共振螺线管线圈的设计[J]. 分析仪器, 2007(2):21-25 doi: 10.3969/j.issn.1001-232X.2007.02.006 Chen Jizhong, Zhang Yiming, Xiao Jijun. Design of solenoid coil for low field NMR[J]. Analytical Instrumentation, 2007(2): 21-25 doi: 10.3969/j.issn.1001-232X.2007.02.006
[2]	荆晓兵, 陈楠, 李勤. 宽平顶低横向场分量螺线管线圈设计[J]. 强激光与粒子束, 2010, 22(3):591-594 doi: 10.3788/HPLPB20102203.0591 Jing Xiaobing, Chen Nan, Li Qin. Design of wide flat-topped low transverse field solenoid magnet[J]. High Power Laser and Particle Beams, 2010, 22(3): 591-594 doi: 10.3788/HPLPB20102203.0591
[3]	梁羽, 马力祯, 吴巍, 等. 2.0T斜螺线管型超导二极磁体设计[J]. 低温与超导, 2017, 45(8):51-56 doi: 10.16711/j.1001-7100.2017.08.010 Liang Yu, Ma Lizhen, Wu Wei, et al. Design of a 2.0T superconducting dipole magnet based on tilted solenoids[J]. Cryogenics & Superconductivity, 2017, 45(8): 51-56 doi: 10.16711/j.1001-7100.2017.08.010
[4]	臧宗旸, 龙全红, 荆晓兵, 等. 基于激光跟踪仪测量方法的磁测探头空间位置测量[J]. 机械工程师, 2019(4):124-125 doi: 10.3969/j.issn.1002-2333.2019.04.042 Zang Zongyang, Long Quanhong, Jing Xiaobing, et al. Space position measurement of magnetic probe based on laser tracker measurement method[J]. Mechanical Engineer, 2019(4): 124-125 doi: 10.3969/j.issn.1002-2333.2019.04.042
[5]	熊娟, 魏薇, 王芳, 等. 螺线管磁场设计的简易仿真分析方法[J]. 大学物理实验, 2021, 34(2):33-36 doi: 10.14139/j.cnki.cn22-1228.2021.02.009 Xiong Juan, Wei Wei, Wang Fang, et al. Simple simulation analysis method for solenoid magnetic field design[J]. Physical Experiment of College, 2021, 34(2): 33-36 doi: 10.14139/j.cnki.cn22-1228.2021.02.009
[6]	牟凡, 董攀, 代志勇. 铁氧体加速腔螺线管线圈温度测量[J]. 强激光与粒子束, 2010, 22(4):825-828 doi: 10.3788/HPLPB20102204.0825 Mu Fan, Dong Pan, Dai Zhiyong. Temperature measurement of accelerator cell solenoid loop[J]. High Power Laser and Particle Beams, 2010, 22(4): 825-828 doi: 10.3788/HPLPB20102204.0825
[7]	牟凡, 董攀, 代志勇. 直线感应加速腔螺线管线圈温升效应研究[J]. 高能量密度物理, 2010(1):9-11,34 Mu Fan, Dong Pan, Dai Zhiyong. Research for temperature effect of accelerator cell solenoid[J]. High Energy Density Physics, 2010(1): 9-11,34
[8]	张华辉. CFETR中心螺线管模型线圈应变和位移实验设计与分析[D]. 合肥: 中国科学技术大学, 2017 Zhang Huahui. Experimental design and analysis of strain and displacement of CFETR CSMC[D]. Hefei: University of Science and Technology of China, 2017
[9]	彭楠, 熊联友, 刘立强, 等. 3T超导螺线管标准磁铁的研制[C]//第八届全国低温工程大会暨中国航天低温专业信息网2007年度学术交流会论文集. 2017 Peng Nan, Xiong Lianyou, Liu Liqiang, et al. The research of standard ferromagnet for 3T superconductive solenoid[C]. 2017