Development of pointed-mouth slit for neutron engineering material diffractometer at China Spallation Neutron Source

Wang Huaibao; Zhou Liang; Hu Chunming; Li Xiaohu

doi:10.11884/HPLPB202335.230217

Volume 35 Issue 11

Oct. 2023

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2023 > 35(11): 114004

Wang Huaibao, Zhou Liang, Hu Chunming, et al. Development of pointed-mouth slit for neutron engineering material diffractometer at China Spallation Neutron Source[J]. High Power Laser and Particle Beams, 2023, 35: 114004. doi: 10.11884/HPLPB202335.230217

Citation:

Wang Huaibao, Zhou Liang, Hu Chunming, et al. Development of pointed-mouth slit for neutron engineering material diffractometer at China Spallation Neutron Source[J]. High Power Laser and Particle Beams, 2023, 35: 114004. doi: 10.11884/HPLPB202335.230217

Citation:

PDF( 7899 KB)

Development of pointed-mouth slit for neutron engineering material diffractometer at China Spallation Neutron Source

doi: 10.11884/HPLPB202335.230217

Wang Huaibao^{1, 2, 3
,},
Zhou Liang^{1, 3
,
,},
Hu Chunming^{1, 3},
Li Xiaohu^{1, 3}

1.
Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China
2.
University of Chinese Academy of Sciences, Beijing 100049, China
3.
Spallation Neutron Source Science Center, Dongguan 523803, China

Received Date: 2023-07-12
Accepted Date: 2023-10-18
Rev Recd Date: 2023-10-18

Available Online: 2023-10-24

Publish Date: 2023-11-11

Abstract

Abstract

The samples of the China Spallation Neutron Source (CSNS) Engineering Material Diffraction Spectrometer (EMD) are very large and have different shapes. The neutron collimation aperture needs to be designed as a pointed-mouth slit to be close to these abnormal components. The main function of the pointed-mouth slit is to provide the beam size is needed by the sample experiment, and ensure that the beam size has high accuracy. The pointed-mouth slit is continuous, and it can be changed according to the experimental requirements. The blade uses enriched boron carbide, which can reduce the deformation of the slit cantilever structure. The slit has a very long mouth, which can approach the special-shaped components and enter into the long tubes. The deformation problem of the cantilever was simulated and analyzed using finite element software. The slit adopts a dual safety design, which can effectively prevent from being damaged by large samples. This slit has been applied to the CSNS engineering material spectrometer. It has made remarkable contributions to residual stress measurement. The application of this slit provides a very important reference for the design of the pointed-mouth slits.
- China Spallation Neutron Source,
- neutron spectrometer,
- pointed slit,
- finite element analysis

FullText(HTML)

References(16)

References

[1]	张俊荣, 庄建, 王平, 等. 中国散裂中子源中子谱仪简介[J]. 现代物理知识, 2022, 34(4):21-24 doi: 10.13405/j.cnki.xdwz.2022.04.010 Zhang Junrong, Zhuang Jian, Wang Ping, et al. Introduction of China spallation neutron source neutron spectrometer[J]. Modern Physics, 2022, 34(4): 21-24 doi: 10.13405/j.cnki.xdwz.2022.04.010
[2]	中国散裂中子源工程[EB/OL]. http://csns.ihep.cas.cn/ China spallation neutron source[EB/OL]. http://csns.ihep.cas.cn/.
[3]	肖仁峰. 中国散裂中子源高压谱仪四刀光阑控制系统设计[D]. 成都: 电子科技大学, 2022 Xiao Renfeng. Design of four-blade slit control system of China Spallation Neutron Source high pressure spectrometer[D]. Chengdu: University of Electronic Science and Technology of China, 2022
[4]	Santisteban J R, Daymond M R, James J A, et al. ENGIN-X: A third-generation neutron strain scanner[J]. Journal of Applied Crystallography, 2006, 39(6): 812-825. doi: 10.1107/S0021889806042245
[5]	Aizawa K, Harjo S, Ito T. The engineering materials diffractometer "TAKUMI"[J]. Hamon, 2010, 20(1): 62-65. doi: 10.5611/hamon.20.1_62
[6]	Wang X L. Conceptual design of the SNS engineering diffractometer[R]. SNS Report No. IS-1.1. 8.2-6035-RE-A-00, 2000.
[7]	Wang X L, Holden T M, Rennich G Q, et al. VULCAN—The engineering diffractometer at the SNS[J]. Physica B:Condensed Matter, 2006, 385/386: 673-675. doi: 10.1016/j.physb.2006.06.103
[8]	肖松文, 何泳成, 何振强, 等. 微小角中子散射谱仪探测器移动小车驱动机构设计及精度测试[J]. 核技术, 2022, 45:090401 Xiao Songwen, He Yongcheng, He Zhenqiang, et al. Driving system design and precision test of the VSANS detector trolleys[J]. Nuclear Techniques, 2022, 45: 090401
[9]	魏娜. 浅析步进电机的选择与使用[J]. 科技与企业, 2013(2):298 doi: 10.13751/j.cnki.kjyqy.2013.02.219 Wei Na. Analysis of the selection and use of stepper motors[J]. Science-Technology Enterprise, 2013(2): 298 doi: 10.13751/j.cnki.kjyqy.2013.02.219
[10]	王零森, 方寅初, 吴芳, 等. 碳化硼在吸收材料中的地位及其与核应用有关的基本性能[J]. 粉末冶金材料科学与工程, 2000, 5(2):113-120 Wang Lingsen, Fang Yingchu, Wu Fang, et al. The position of boron carbide in neutron absorbing materials and its properties relation to nuclear applications[J]. Materials Science and Engineering of Powder Metallurgy, 2000, 5(2): 113-120
[11]	刘桂荣, 裴燕斌. 含B中子吸收材料的研究进展[J]. 粉末冶金工业, 2018, 28(5):1-5 doi: 10.13228/j.boyuan.issn1006-6543.20180095 Liu Guirong, Pei Yanbin. Research progress of boron-containing neutron absorber materials[J]. Powder Metallurgy Industry, 2018, 28(5): 1-5 doi: 10.13228/j.boyuan.issn1006-6543.20180095
[12]	卢希庭. 原子核物理[M]. 北京: 中国原子能出版社, 2001 Lu Xiting. Nuclear physics[M]. Beijing: China Atomic Energy Press, 2001
[13]	黄骏, 马雁云. 医疗加速器治疗床以及旋转臂的受力分析[J]. 机械工程师, 2011(8):79-80 doi: 10.3969/j.issn.1002-2333.2011.08.033 Huang Jun, Ma Yanyun. Force analysis of medical accelerator treatment bed and rotating arm[J]. Mechanical Engineer, 2011(8): 79-80 doi: 10.3969/j.issn.1002-2333.2011.08.033
[14]	邹易清, 康玲, 屈化民, 等. 中国散裂中子源快循环同步加速器主准直器的设计与研究[J]. 强激光与粒子束, 2013, 25(3):741-745 doi: 10.3788/HPLPB20132503.0741 Zou Yiqing, Kang Ling, Qu Huamin, et al. Design and research of primary collimator for CSNS/RCS[J]. High Power Laser and Particle Beams, 2013, 25(3): 741-745 doi: 10.3788/HPLPB20132503.0741
[15]	王会永, 满忠雷, 孙立, 等. 基于激光干涉仪的机床定位精度测量与分析[J]. 检验检疫学刊, 2015(2):36-37,43 doi: 10.3969/j.issn.1674-5354.2015.02.010 Wang Huiyong, Man Zhonglei, Sun Li, et al. Analysis and measurement for linear positioning accuracy of machine tools based on laser interferometer[J]. Quality Safety Inspection and Testing, 2015(2): 36-37,43 doi: 10.3969/j.issn.1674-5354.2015.02.010
[16]	吴江杰, 陈伟庆, 辛天飞. 激光干涉仪测量数控机床定位精度的方法研究[J]. 工业控制计算机, 2017, 30(11):159-160 doi: 10.3969/j.issn.1001-182X.2017.11.074 Wu Jiangjie, Chen Weiqing, Xin Tianfei. Research on the method of measuring the positioning accuracy of CNC machine tools using laser interferometer[J]. Industrial Control Computer, 2017, 30(11): 159-160 doi: 10.3969/j.issn.1001-182X.2017.11.074