Quality quantification in pulsed power supply for synchrotron magnet

Liang Yiqing; Yuan Youjin; Wang Xiaojun; Shen Guodong; Huang Yuzhen; Li Jiqiang; Zhang Huajian; Gao Daqing; Zhang Xiang; Yang Jing

doi:10.11884/HPLPB202436.240044

Volume 36 Issue 12

Nov. 2024

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2024 > 36(12): 124001

Liang Yiqing, Yuan Youjin, Wang Xiaojun, et al. Quality quantification in pulsed power supply for synchrotron magnet[J]. High Power Laser and Particle Beams, 2024, 36: 124001. doi: 10.11884/HPLPB202436.240044

Citation:

Liang Yiqing, Yuan Youjin, Wang Xiaojun, et al. Quality quantification in pulsed power supply for synchrotron magnet[J]. High Power Laser and Particle Beams, 2024, 36: 124001. doi: 10.11884/HPLPB202436.240044

Citation:

PDF( 3948 KB)

Quality quantification in pulsed power supply for synchrotron magnet

doi: 10.11884/HPLPB202436.240044

1.
School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100000, China
2.
Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China

Received Date: 2024-07-25
Accepted Date: 2024-09-22
Rev Recd Date: 2024-09-22

Available Online: 2024-11-02

Publish Date: 2024-11-08

Abstract

Abstract

In synchrotrons, the high-frequency ripple error of magnet excitation current causes magnetic field ripple, which leads to decreased beam acceptance. The low-frequency tracking error of the excitation current would affect the matching degree of magnetic field and beam energy, which would cause the closed orbit distortion of the beam. The correlation between magnetic field ripple and excitation current ripple of HIAF BRing dipole magnet is studied in this paper. The current quality quantification methods based on high and low-frequency separation are proposed, which evaluate the effect of excitation current error on the beam. The low-frequency tracking error and high-frequency ripple error of the excitation current are obtained by Gaussian smoothing. Three times the standard deviation is used as the quantification indicator of the excitation current in terms of ripple and tracking error. Since parameters of the low-pass filter are determined by the response relationship between magnetic field ripple and excitation current ripple, this method could accurately quantify the magnetic field ripple. Th current tracking error waveform could be used to adjust the reference waveform of synchrotron pulse power supplies, improving the matching degree of magnetic field and beam energy.
- tracking error,
- ripple error,
- quantification method,
- pulse power supply,
- synchrotron

FullText(HTML)

References(17)

References

[1]	Yang J C, Xia J W, Xiao G Q, et al. High Intensity heavy ion Accelerator Facility (HIAF) in China[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2013, 317: 263-265. doi: 10.1016/j.nimb.2013.08.046
[2]	Zhou Xiaohong, Yang Jiancheng, The HIAF Project Team. Status of the high-intensity heavy-ion accelerator facility in China[J]. AAPPS Bulletin, 2022, 32: 35. doi: 10.1007/s43673-022-00064-1
[3]	Zhang C. Status of BEPC and plans of BEPCII[C]//Proceedings of the 2nd Asian Particle Accelerator Conference. 2001.
[4]	Chen S Y, Xu H J, Zhao Z T. Shanghai synchrotron radiation facility[C]//Proceedings of the 1999 Particle Accelerator Conference. 1999: 209-211.
[5]	Hahn H, Forsyth E, Foelsche H, et al. The RHIC design overview[J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2003, 499(2/3): 245-263.
[6]	Augustin I, on Behalf of the FAIR Project Coordination Group. Status of the FAIR project[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2007, 261(1/2): 1014-1017.
[7]	High-Intensity Proton Accelerator Project Team. Accelerator technical design report for high-intensity proton accelerator facility project, J-PARC[R]. JAERI-Tech-2003-044, 2003.
[8]	Schmidt R. Status of the LHC[C]. IEEE Transactions on Nuclear Science, 2002.
[9]	Bruning O S, Collier P, Lebrun P, et al. LHC design Report[R]. Geneva: CERN, 2004.
[10]	Bordry F. LHC power converters performance requirements[R/OL]. https://cds.cern.ch/record/567166/files/7-5-fb.pdf.
[11]	Gerigk F. Superconducting RF at CERN: operation, projects, and R&D[J]. IEEE Transactions on Applied Superconductivity, 2018, 28: 3500205.
[12]	Liang Yiqing, Wang Xiaojun, Li Jiqiang, et al. IEEE 1588-based timing and triggering prototype for distributed power supplies in HIAF[J]. IEEE Transactions on Instrumentation and Measurement, 2022, 71: 5502309.
[13]	胡寿松. 自动控制原理[M]. 北京: 科学出版社, 2001 Hu Shousong. Principle of automatic control[M]. Beijing: Science Press, 2001
[14]	Shen Yi, Tang Xiyuan, Shen Linxiao, et al. A 10-bit 120-ms/s SAR ADC with reference ripple cancellation technique[J]. IEEE Journal of Solid-State Circuits, 2020, 55(3): 680-692. doi: 10.1109/JSSC.2019.2946215
[15]	Thurel Y, Bordy F, Charoy A. EMC concepts applied to the switching mode power converters supplying the superconductive magnets for the CERN LHC accelerator[C]//Proceedings of 2019 International Symposium on Electromagnetic Compatibility. 2019: 796-801.
[16]	Yang Xin, Yuan Ye, Zhang Xueqiang, et al. Shaping high-power IGBT switching transitions by active voltage control for reduced EMI generation[J]. IEEE Transactions on Industry Applications, 2015, 51(2): 1669-1677. doi: 10.1109/TIA.2014.2347578
[17]	Jouyaeian A, Fan Qinwen, Zamparette R, et al. A hybrid magnetic current sensor with a multiplexed ripple-reduction loop[J]. IEEE Journal of Solid-State Circuits, 2023, 58(10): 2874-2882. doi: 10.1109/JSSC.2023.3273389