Li Jin, Li Xin, Li Yuan, et al. Module for three-pulsed power system[J]. High Power Laser and Particle Beams, 2012, 24: 893-897. doi: 10.3788/HPLPB20122404.0893
Citation:
Li Jin, Li Xin, Li Yuan, et al. Module for three-pulsed power system[J]. High Power Laser and Particle Beams, 2012, 24: 893-897. doi: 10.3788/HPLPB20122404.0893
Li Jin, Li Xin, Li Yuan, et al. Module for three-pulsed power system[J]. High Power Laser and Particle Beams, 2012, 24: 893-897. doi: 10.3788/HPLPB20122404.0893
Citation:
Li Jin, Li Xin, Li Yuan, et al. Module for three-pulsed power system[J]. High Power Laser and Particle Beams, 2012, 24: 893-897. doi: 10.3788/HPLPB20122404.0893
A module is designed for six-channel, three-pulsed power system, which is based on MHz repeating rate burst high-voltage generator with Blumlein pulse forming lines connected in parallel and multi-stage laser trigger system. Parameter designs of Blumlein device, confluent/blocking network, and trigger system are discussed. The analysis and simulation results show that the module meets the needs of multi-pulse linear induction accelerator. The output voltage with an amplitude of 300 kV, time jitter less than 2.3 ns (standard deviation), and repetition rate of MHz level is achieved.