Design and machining of components of 0.22 THz folded waveguide traveling wave tube

Xu Ao; Hu Linlin; Yan Lei; Chen Hongbin; Jin Xiao; Zhou Chuanming

doi:10.3788/HPLPB20122409.2135

Volume 24 Issue 09

Aug. 2012

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2012 > 24(09): 2135-2140

Xu Ao, Hu Linlin, Yan Lei, et al. Design and machining of components of 0.22 THz folded waveguide traveling wave tube[J]. High Power Laser and Particle Beams, 2012, 24: 2135-2140. doi: 10.3788/HPLPB20122409.2135

Citation:

Xu Ao, Hu Linlin, Yan Lei, et al. Design and machining of components of 0.22 THz folded waveguide traveling wave tube[J]. High Power Laser and Particle Beams, 2012, 24: 2135-2140. doi: 10.3788/HPLPB20122409.2135

Citation:

PDF( 3301 KB)

Design and machining of components of 0.22 THz folded waveguide traveling wave tube

doi: 10.3788/HPLPB20122409.2135

1.
Key Laboratory of High Power Microwave Technology,Institute of Applied Electronics,CAEP,Mianyang 621900,China

Received Date: 2012-01-13
Rev Recd Date: 2012-02-22
Publish Date: 2012-08-24

Abstract

Abstract

This paper presents the optimum design and simulation results of 0.22 THz folded waveguide TWT(traveling wave tube) components. Precision machining and assembly welding technologies are investigated for these components. Finally, the components with high precision, satisfying the design requirements, are obtained.
- folded waveguide traveling wave tube,
- electron gun,
- slow wave structure,
- permanent magnet focusing system,
- collector