deng jian jun, ding bo nan, wang hua cen, et al. Physical design of the DragonI linear induction accelerator[J]. High Power Laser and Particle Beams, 2003, 15.
Citation:
deng jian jun, ding bo nan, wang hua cen, et al. Physical design of the DragonI linear induction accelerator[J]. High Power Laser and Particle Beams, 2003, 15.
deng jian jun, ding bo nan, wang hua cen, et al. Physical design of the DragonI linear induction accelerator[J]. High Power Laser and Particle Beams, 2003, 15.
Citation:
deng jian jun, ding bo nan, wang hua cen, et al. Physical design of the DragonI linear induction accelerator[J]. High Power Laser and Particle Beams, 2003, 15.
This paper describes the design considerations of the DragonI linear induction accelerator (LIA) at Institute of Fluid Physics, China Academy of Engineering Physics. The DragonI facility is an electronic linac and consists of a -2.0MV/+1.5MV bipolarity inductive adder injector, 72 accelerating cavities, pulsedpower system, beamtransport, control and auxiliary systems. It can produce an electron beam of 3kA, 20MeV with pulse width of 90ns (FWHM). Good accelerating voltage pulse for each cavity with width of 120ns (FWHM) and up to 60ns flattop within ±1% variation has been obtained for high beam quality.
DownLoad: