sun peng, ding yao-gen, zhao ding. Design of waveguide twist for klystron power combining output structure[J]. High Power Laser and Particle Beams, 2007, 19.
Citation:
sun peng, ding yao-gen, zhao ding. Design of waveguide twist for klystron power combining output structure[J]. High Power Laser and Particle Beams, 2007, 19.
sun peng, ding yao-gen, zhao ding. Design of waveguide twist for klystron power combining output structure[J]. High Power Laser and Particle Beams, 2007, 19.
Citation:
sun peng, ding yao-gen, zhao ding. Design of waveguide twist for klystron power combining output structure[J]. High Power Laser and Particle Beams, 2007, 19.
A waveguide twist for 9 GHz klystron power combining output structure has been designed in the paper, which is used to connect klystron power combiner and output cavity. The waveguide twist is composed of a rectangular resonator, two rectangular coupling slots and two waveguides. The two waveguides which serve as input and output work in rectangular TE10 and TE01 modes respectively and they offset from the center while perpendicular to each other. The rectangular resonator in the center works in the combined modes of TM110, TE101 and TE011. Optimization result shows that this waveguide twist has three reflection zeros forming a large passband. Finally, a klystron output cavity was loaded by a power combiner with the designed waveguide twist. The calculation result of its gap impedance show
DownLoad: