li yawei, deng jianjun, xie min, et al. Measurement and diagnosis system for 1.2 MV repetitive pulsed power source[J]. High Power Laser and Particle Beams, 2010, 22.
Citation:
li yawei, deng jianjun, xie min, et al. Measurement and diagnosis system for 1.2 MV repetitive pulsed power source[J]. High Power Laser and Particle Beams, 2010, 22.
li yawei, deng jianjun, xie min, et al. Measurement and diagnosis system for 1.2 MV repetitive pulsed power source[J]. High Power Laser and Particle Beams, 2010, 22.
Citation:
li yawei, deng jianjun, xie min, et al. Measurement and diagnosis system for 1.2 MV repetitive pulsed power source[J]. High Power Laser and Particle Beams, 2010, 22.
In order to analyze the discharge performance and improve the design of the power system, a set of measurement and diagnosis system for the 1.2 MV repetitive pulsed power source, which supplies the drive power for a high power microwave source, has been designed by studying the high-voltage, high-current testing technology, data acquisition, signal processing, fault diagnosis, virtual instruments and electromagnetic compatibility technology, etc. A resistive-capacitive divider and a Rogowski coil are adopted in measurement; ADLINK corporation’s PXI chips are used in data acquisition; data transmission system, condition monitoring and data analysis are developed by LabVIEW. This system can realize on-line monitoring and data analysis for the repetitive pulsed power source.