zhang xiao-qiu, wang guo-zhi, zhao bao-sheng, et al. Single pulse switch used in mode-locked Nd:YAG laser[J]. High Power Laser and Particle Beams, 2004, 16.
Citation:
zhang xiao-qiu, wang guo-zhi, zhao bao-sheng, et al. Single pulse switch used in mode-locked Nd:YAG laser[J]. High Power Laser and Particle Beams, 2004, 16.
zhang xiao-qiu, wang guo-zhi, zhao bao-sheng, et al. Single pulse switch used in mode-locked Nd:YAG laser[J]. High Power Laser and Particle Beams, 2004, 16.
Citation:
zhang xiao-qiu, wang guo-zhi, zhao bao-sheng, et al. Single pulse switch used in mode-locked Nd:YAG laser[J]. High Power Laser and Particle Beams, 2004, 16.
Xi'an Institute of Optics and Fine Mechanics,Xi'an 710068,China2.Institute of Fluid Physics,China Academy of Engineering Physics,P.O.Box 919-106,Mianyang 621900,China
When adopting mode-locked Nd:YAG laser to choose single pulse, KD*P Pockels cell is usually used. The half wavelength voltage is 6.6 kV to the laser of 1.06μm wavelength. In recent years, cold cathode thyratron KN-22 is widely used in circuit, but here KN-22 is replaced by MOSFET. The circuit with MOSFET has stable and credible performance, it can output a pulse of －6.6~－8kV and the pulse width can be adjusted from 5ns to 10ns. The circuit has a short time jitter (0.5ns), a delay of 30ns and high probability of selecting single pulse (100%). No abnormity is found after using a long time and the circuit can be also used as chopper and pulse shearer．
DownLoad: