Study on the applicability of lithium-titanate battery in pulsed high power laser system
-
摘要: 为了评估钛酸锂电池在脉冲高能激光系统中的适用性,主要基于储能介质的放电能力和安全性应用特点,概述了脉冲高能激光系统对初级储能装置的需求条件,通过类比和理论计算分析了常用储能介质的适用性,并通过放电性能试验和安全性试验验证了钛酸锂电池的工程应用可行性。结果表明,钛酸锂电池具备较高的放电能力和很高的安全性,能够满足脉冲高能激光系统的应用需求,具备推广条件。Abstract: To evaluate the applicability of lithium-titanate oxide (LTO) battery in pulsed high power laser system (PHPLS), this paper summarizes the requirements of the PHPLS for the primary energy storage device based on the discharge capacity and safety application characteristics of the energy storage medium, analyzes the applicability of the common energy storage medium through analogy and theoretical calculation, and verifies the engineering application feasibility of LTO by discharge performance test and safety test. The results show that the LTO has high discharge capacity and high safety, which can meet the application requirements of the PHPLS, and has the conditions for promotion.
-
表 1 常用储能介质性能指标
Table 1. Commonly used energy storage medium performance indicators
power density/
(W·kg−1)energy density/
(W·h·kg−1)operating temperature
range/℃cell
voltage/Vcycle
life/cyclesafety price supercapacitor 2000 15 −40~70 2.7 100000 high high lithium-titanate oxide 1400 80 −40~60 2.3 10000 high high lithium iron phosphate battery 100 100 0~55 3.0 2000 normal low ternary lithium battery 160 200 −20~55 3.6 3000 low low 表 2 不同脉冲数的初级储能装置指标
Table 2. Primary energy storage device index with different pulse number
n energy/MJ maximum
current/Acapacity/F weight/kg volume/m3 capacity/(A·h) weight/kg volume/m3 supercapacitor lithium-titanate oxide 20 0.4 600 10 103 0.09 20 185 0.18 40 0.8 600 20 182 0.17 20 185 0.18 60 1.2 600 30 273 0.25 30 185 0.18 80 1.6 600 40 364 0.34 40 277 0.27 表 3 初级储能装置性能指标
Table 3. Performance index of primary energy storage device
rated voltage/V rated capacity/(A·h) output voltage range/V maximum discharge current/A operating temperature range/℃ cycle life/cycle 552 20 450~600 600 −40~70 20000 -
[1] 阎吉祥. 激光武器[M]. 北京: 国防工业出版社, 2016: 29-30Yan Jixiang. Laser weapons[M]. Beijing: National Defense Industry Press, 2016: 29-30 [2] 徐健, 梁勖, 刘冬生, 等. 脉冲激光系统充电电源功率因数校正技术研究[J]. 激光技术, 2020, 44(6):732-737Xu Jian, Liang Xu, Liu Dongsheng, et al. Research on power factor correction technology of pulse laser system charging power supply[J]. Laser Technology, 2020, 44(6): 732-737 [3] 李波, 李博婷, 黄斌, 等. 高可靠性脉冲氙灯电源设计[J]. 强激光与粒子束, 2017, 29:065004 doi: 10.11884/HPLPB201729.160468Li Bo, Li Boting, Huang Bin, et al. Design of high reliability pulse xenon lamp power supply[J]. High Power Laser and Particle Beams, 2017, 29: 065004 doi: 10.11884/HPLPB201729.160468 [4] 邹锦浪, 沈昂, 何娇娇, 等. 一种大功率高重频脉冲激光电源的研究[J]. 电子设计工程, 2022, 30(6):151-155Zou Jinlang, Shen Ang, He Jiaojiao, et al. Research on a high power and high repetition rate pulse laser power supply[J]. Electronic Design Engineering, 2022, 30(6): 151-155 [5] 任旭. 基于CPLD的全桥谐振式大功率脉冲激光电源的研究[D]. 长春: 长春理工大学, 2004: 5-38Ren Xu. Research on full bridge resonant pulsation laser power supply based on CPLD[D]. Changchun: Changchun University of Science and Technology, 2004: 5-38 [6] 赵航. 开关型YAG脉冲激光电源系统的研究[D]. 长春: 长春理工大学, 2010: 3-31Zhao Hang. Study on switched YAG pulsed laser power system[D]. Changchun: Changchun University of Science and Technology, 2010: 3-31 [7] 刘福才, 赵晓娟, 何锁纯. 基于DSP的PFN触发时序控制系统设计及实验分析[J]. 高电压技术, 2013, 39(7):1778-1783Liu Fucai, Zhao Xiaojuan, He Suochun. Design and experimental analysis of DSP-based PFN trigger timing control system[J]. High Voltage Engineering, 2013, 39(7): 1778-1783 [8] Liu Fucai, Zhao Xiaojuan, He Suocun. The design of a DSP-based PFN trigger timing control system and the experimental study[C]//16th International Symposium on Electromagnetic Launch Technology (EML). 2012: 1-6. [9] Chang D I, Long B, Chiu D, et al. A pulse forming network and test fixture for screening electrothermal chemical candidate propellants[J]. IEEE Transactions on Magnetics, 1993, 29(1): 919-922. doi: 10.1109/20.195700 [10] 李志强, 杨建华, 张建德, 等. 紧凑重频PFN-Marx脉冲发生器[J]. 强激光与粒子束, 2016, 28:015013 doi: 10.11884/HPLPB201628.015013Li Zhiqiang, Yang Jianhua, Zhang Jiande, et al. A compact repetitive PFN-Marx generator[J]. High Power Laser and Particle Beams, 2016, 28: 015013 doi: 10.11884/HPLPB201628.015013 [11] 任亚辉, 林菊平, 童勇, 等. 高能脉冲氙灯驱动电路特性分析[J]. 激光技术, 2022, 46(3):397-401Ren Yahui, Lin Juping, Tong Yong, et al. Analysis of driving circuit characteristics of high-power pulsed xenon lamp[J]. Laser Technology, 2022, 46(3): 397-401 [12] 王传伟, 李洪涛. 准方波脉冲形成网络的理论分析与设计[J]. 强激光与粒子束, 2018, 30:035005 doi: 10.11884/HPLPB201830.170392Wang Chuanwei, Li Hongtao. Theoretical analysis and design of the trapezoidal pulse forming network[J]. High Power Laser and Particle Beams, 2018, 30: 035005 doi: 10.11884/HPLPB201830.170392 [13] 吴健, 张言茹, 郑鑫杰. 钛酸锂电池在城市轨道交通的适用性研究[J]. 都市快轨交通, 2021, 34(6):39-46Wu Jian, Zhang Yanru, Zheng Xinjie. Study on the applicability of lithium titanate battery in urban rail transit[J]. Urban Rapid rail transit, 2021, 34(6): 39-46 [14] 苏剑, 李红兵. 钛酸锂电池在动车组上的应用研究[J]. 机车电传动, 2011(4):38-40,43Su Jian, Li Hongbing. Study on the application of Li4Ti5O12 battery on EMUs[J]. Electric Drive for Locomotives, 2011(4): 38-40,43 [15] 邓泽平, 李倩, 王轶欧. 军用航空应急起动电源设计与实现[J]. 电源技术, 2020, 44(1):129-131Deng Zeping, Li Qian, Wang Yiou. Design and implementation of emergency starting power supply for military aviation[J]. Chinese Journal of Power Sources, 2020, 44(1): 129-131 [16] 庄书琴. 大功率脉冲激光电源充电变换器的研究[D]. 武汉: 华中科技大学, 2008: 10-27Zhuang Shuqin. Research on charging converter of high power pulsation laser power supply[D]. Wuhan: Huazhong University of Science and Technology, 2008: 10-27 [17] 林庆华, 栗保明. 电容储能高功率脉冲成形网络浪涌过程分析[J]. 南京理工大学学报(自然科学版), 2008, 32(6):729-732,737Lin Qinghua, Li Baoming. Analysis on surge process generated in high power pulse forming network with capacitor energy storage system[J]. Journal of Nanjing University of Science and Technology (Natural Science), 2008, 32(6): 729-732,737 [18] 许铀, 杨勇. 基于电池内阻特性的电动汽车放电模式研究[J]. 电源技术, 2016, 40(6):1180-1184Xu You, Yang Yong. Study on discharging modes of electric vehicle based on lithium-ion battery resistance performance[J]. Chinese Journal of Power Sources, 2016, 40(6): 1180-1184 [19] GJB 2374A-2013 锂电池安全要求[S]GJB 2374A-2013 Safety requirement for lithium cells and batteries[S] [20] GJB 4477-2002 锂离子蓄电池组通用规范[S]GJB 4477-2002 General specification for Li-ion batteries[S] -