Development of beam profile and beam halo monitors prototype in front of target station for ESS

Niu Haihua; Li Youtang; Zhang Bin; He Yuan; Cyrille Thomas; Xie Hongming; Jia Huan; Wang Zhijun

doi:10.11884/HPLPB201931.190167

Volume 31 Issue 11

Oct. 2019

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2019 > 31(11): 115106

Niu Haihua, Li Youtang, Zhang Bin, et al. Development of beam profile and beam halo monitors prototype in front of target station for ESS[J]. High Power Laser and Particle Beams, 2019, 31: 115106. doi: 10.11884/HPLPB201931.190167

Citation:

Niu Haihua, Li Youtang, Zhang Bin, et al. Development of beam profile and beam halo monitors prototype in front of target station for ESS[J]. High Power Laser and Particle Beams, 2019, 31: 115106. doi: 10.11884/HPLPB201931.190167

Citation:

PDF( 6155 KB)

Development of beam profile and beam halo monitors prototype in front of target station for ESS

doi: 10.11884/HPLPB201931.190167

1.
School of Mechanical and Electronical Engineering, Lanzhou University of Technology, Lanzhou 730050, China
2.
Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China
3.
European Spallation Source ERIC, P. O. Box 176, Lund SE-22100, Sweden

Received Date: 2019-05-15
Rev Recd Date: 2019-07-23
Publish Date: 2019-11-15

Abstract

Abstract

In order to study the physical characteristics of high power beam in front of target, the European spallation neutron source plans to develop two beam diagnostic prototypes, including a multi-wire beam profile monitor and a beam halo monitor. Online testing of the prototypes will be conducted on the 3 GeV proton beam transmission line (3NBT) at J-PARC of Japan. In view of the small installation pipe on dump of 3NBT, and the drive mechanism of the prototype should have a large stroke, a multi-wire beam profile monitor of multipoint position suitable for small pipe is proposed, which is integrated with beam halo probe in one prototype. The prototype has compact structure and can realize independent drive of two monitors. The deformation of the monitors and their transmission rods has been analyzed by using ANSYS Workbench. The development of the prototype is completed. To ensure the reliability of the prototype, the off-line testing, such as optical image measurement of wire spacing, vacuum leak detecting, small aperture pass testing and on-off testing has been completed.
- beam profile monitor,
- beam halo monitor,
- dump,
- target,
- European Spallation Source

FullText(HTML)

References(11)

References

[1]	Meigo S, Ooi M, Ikezaki K, et al. Development of profile monitor system for high intense Spallation Neutron Source[C]//Proc of IBIC2012. 2012: 1-5.
[2]	Meigo S, Matsuda H, Takei H. Profile monitor on target for Spallation Neutron Source[C]//Proc of IBIC2017. 2017: 373-376.
[3]	Hiroki S, Hayashi N, Kawase M, et al. Multi-wire profile monitor for J-PARC 3GeV RCS[C]//Proc of EPAC08. 2008: 1131-1133.
[4]	Sako H, Hiroki S, Takahashi H, et al. An application for beam profile reconstruction with multi-wire profile monitors at J-PARC RCS[C]//Proc of EPAC08. 2008: 1272-1274.
[5]	Gilpatrick J, Chacon P, Martinez D, et al. LANSCE Harp upgrade: analysis, design, fabrication, and installation[C]//Proc of BIW10. 2010: 132-136.
[6]	Sedillo J, Martinez D, Nguyen J. LANSCE 1L Harp data acquisition system upgrade: first results[C]//Proc of IBIC2015. 2015: 542-546.
[7]	Shea T, Assadi S, Witkover R, et al. SNS accelerator diagnostics: progress and challenges[C]//Proc of PACS2001. 2001: 512-516.
[8]	Blokland W. High beam intensity Harp studies and developments at SNS[C]//Proc of IPAC2015. 2015: 17-20.
[9]	王安鑫, 杨涛, 徐韬光, 等. 用于测量束流剖面的探测器: CN206892352U[P]. 2018-01-16. Wang Anxin, Yang Tao, Xu Taoguang, et al. A detector for measuring beam profile: CN206892352U. 2018-01-16
[10]	孙纪磊, 阮玉芳, 肖帅, 等. 强流质子加速器束流剖面分布及束晕测量系统设计[J]. 强激光与粒子束, 2011, 23(1): 190-194. http://www.hplpb.com.cn/article/id/4816 Sun Jilei, Ruan Yufang, Xiao Shuai, et al. Design of beam profile and halo measurement system for high-intensity RFQ accelerator. High Power Laser and Particle Beams, 2011, 23(1): 190-194 http://www.hplpb.com.cn/article/id/4816
[11]	Sakamoto S, Meigo S, Fujimori H, et al. Advanced design of high-intensity beam transport line in J-PARC[J]. Nuclear Instruments and Methods in Physics Research A, 2006, 562(2): 638-641.