Optimization design for vibration environmental adaptability of coaxial pulse forming line

Fan Hongyan; Pan Yafeng; Wang Junjie; Hou Zhenyuan; Sun Xu; Fan Xuliang; Guo xu

doi:10.11884/HPLPB202436.230223

Volume 36 Issue 1

Jan. 2024

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2024 > 36(1): 013012

Fan Hongyan, Pan Yafeng, Wang Junjie, et al. Optimization design for vibration environmental adaptability of coaxial pulse forming line[J]. High Power Laser and Particle Beams, 2024, 36: 013012. doi: 10.11884/HPLPB202436.230223

Citation:

Fan Hongyan, Pan Yafeng, Wang Junjie, et al. Optimization design for vibration environmental adaptability of coaxial pulse forming line[J]. High Power Laser and Particle Beams, 2024, 36: 013012. doi: 10.11884/HPLPB202436.230223

Citation:

PDF( 21143 KB)

Optimization design for vibration environmental adaptability of coaxial pulse forming line

doi: 10.11884/HPLPB202436.230223

1.
Key Laboratory of Advanced Science and Technology on High Power Microwave, Northwest Institute of Nuclear Technology, Xi’an 710024, China
2.
Xi’an Jiaotong University, Xi’an 710049, China

Received Date: 2023-07-15
Accepted Date: 2023-10-02
Rev Recd Date: 2023-09-28

Available Online: 2024-01-15

Publish Date: 2024-01-15

Abstract

Abstract

Taking the coaxial pulse forming line (PFL) with cantilever structure as the research object, we carried out an optimization design for improving the vibration environmental adaptability. Firstly, through the analysis of the actual working condition and simulation calculation, the available anti-loosening measures for the blind hole screw in the inner conductor were determined as follows: using spiralock thread, applying anti-loosening glue and optimizing the number of the screws. Secondly, the insulator material was preferred to improve the connection stiffness of the inner conductor and the middle conductor according to the simulation analysis and the insulation test results. Finally, the vibration test was carried out to verify the effectiveness of the optimization design. The result show that the optimized equivalent parts of PFL could pass the long-term assessment, indicating that the vibration environment adaptability was greatly improved. The research results have reference significance for the vibration environment adaptability design of the same type of pulse power source.
- coaxial PFL,
- the vibration environment adaptability,
- screw anti-loosening,
- insulation test,
- optimization design

FullText(HTML)

References(16)

References

[1]	康强, 常安碧, 李名加, 等. 带脉冲形成线的1.0 MV 100 Hz紧凑型Tesla变压器的研制[J]. 强激光与粒子束, 2006, 18(3):451-454 Kang Qiang, Chang Anbi, Li Mingjia, et al. Development of a 1.0 MV 100 Hz compact Tesla transformer with PFL[J]. High Power Laser and Particle Beams, 2006, 18(3): 451-454
[2]	石磊, 朱郁丰, 卢彦雷, 等. 紧凑Tesla变压器型纳秒脉冲源[J]. 强激光与粒子束, 2014, 26:125001 doi: 10.11884/HPLPB201426.125001 Shi Lei, Zhu Yufeng, Lu Yanlei, et al. Compact GW nanosecond pulse generator based on Tesla transformer[J]. High Power Laser and Particle Beams, 2014, 26: 125001 doi: 10.11884/HPLPB201426.125001
[3]	王刚, 张喜波, 王俊杰, 等. 基于Tesla变压器和Blumlein线的低抖动重频脉冲发生器[J]. 强激光与粒子束, 2016, 28:045005 doi: 10.11884/HPLPB201628.125005 Wang Gang, Zhang Xibo, Wang Junjie, et al. Low-jitter repetitive pulsed generator based on Tesla transformer and Blumlein pulse forming line[J]. High Power Laser and Particle Beams, 2016, 28: 045005 doi: 10.11884/HPLPB201628.125005
[4]	张喜波, 苏建仓, 潘亚峰, 等. 倍宽脉冲形成线[C]//第四届全国脉冲功率会议. 2015: A38 Zhang Xibo, Su Jiancang, Pan Yafeng, et al. Multiple-width pulse forming lines[C]//4th Chinese Pulse Power Conference. 2015: A38
[5]	范红艳, 张喜波, 刘胜, 等. Tesla型脉冲功率源随机振动响应分析[J]. 现代应用物理, 2018, 9:031003 Fan Hongyan, Zhang Xibo, Liu Sheng, et al. Random vibration analysis of Tesla-type pulse generator[J]. Modern Applied Physics, 2018, 9: 031003
[6]	范红艳, 王俊杰, 刘胜, 等. 同轴脉冲形成线的运输振动环境适应性研究[J]. 强激光与粒子束, 2021, 33:055004 doi: 10.11884/HPLPB202133.210067 Fan Hongyan, Wang Junjie, Liu Sheng, et al. Research on transportation vibration environmental adaptability of coaxial pulse forming line[J]. High Power Laser and Particle Beams, 2021, 33: 055004 doi: 10.11884/HPLPB202133.210067
[7]	Junker G H. New criteria for self-loosening of fasteners under vibration[J]. SAE Transaction, 1969, 78: 314-335.
[8]	Sakai T. Investigations of bolt loosening mechanisms: 1st report, on the bolts of transversely loaded joints[J]. Bulletin of JSME, 1978, 21(159): 1385-1390. doi: 10.1299/jsme1958.21.1385
[9]	Pai N G, Hess D P. Three-dimensional finite element analysis of threaded fastener loosening due to dynamic shear load[J]. Engineering Failure Analysis, 2002, 9(4): 383-402. doi: 10.1016/S1350-6307(01)00024-3
[10]	Pai N G, Hess D P. Experimental study of loosening of threaded fasteners due to dynamic shear loads[J]. Journal of Sound and Vibration, 2002, 253(3): 585-602. doi: 10.1006/jsvi.2001.4006
[11]	方子帆, 吴行, 曹钢, 等. 动态组合载荷作用下螺栓连接结构松动机理研究[J]. 机械强度, 2017, 39(2):386-391 doi: 10.16579/j.issn.1001.9669.2017.02.024 Fang Zifan, Wu Hang, Cao Gang, et al. Research on bolt connection loose mechanism under dynamic tension compression and shear load[J]. Journal of Mechanical Strength, 2017, 39(2): 386-391 doi: 10.16579/j.issn.1001.9669.2017.02.024
[12]	王传华, 王文莉, 林清源, 等. 基于精确建模的横向振动工况下螺栓松动机理研究[J]. 宇航总体技术, 2018, 2(4):43-51,64 Wang Chuanhua, Wang Wenli, Lin Qingyuan, et al. Study on bolt loosening mechanism in vibration condition based on precise model[J]. Astronautical Systems Engineering Technology, 2018, 2(4): 43-51,64
[13]	方子帆, 吴祖双, 朱畅, 等. 输电塔横担螺栓铝合金防松垫片的防松性能研究与改进设计[J]. 三峡大学学报(自然科学版), 2022, 44(3):74-78 doi: 10.13393/j.cnki.issn.1672-948X.2022.03.012 Fang Zifan, Wu Zushuang, Zhu Chang, et al. Design and research on aluminum alloy anti-loosening washer for cross arm bolt of transmission tower[J]. Journal of China Three Gorges University (Natural Sciences), 2022, 44(3): 74-78 doi: 10.13393/j.cnki.issn.1672-948X.2022.03.012
[14]	唐羽. 内六角圆柱头螺栓多重防松措施设计[J]. 机械工程与自动化, 2017(2):200-201 doi: 10.3969/j.issn.1672-6413.2017.02.084 Tang Yu. Multiple locking design of inner-hexagon bolt[J]. Mechanical Engineering & Automation, 2017(2): 200-201 doi: 10.3969/j.issn.1672-6413.2017.02.084
[15]	董得义, 李志来, 杨利伟, 等. 防松胶对螺纹连接预紧力影响试验研究[J]. 振动与冲击, 2015, 34(22):121-124,137 doi: 10.13465/j.cnki.jvs.2015.22.021 Dong Deyi, Li Zhilai, Yang Liwei, et al. Experiment study on the influence of locking adhesive on the preload of screw thread connection[J]. Journal of Vibration and Shock, 2015, 34(22): 121-124,137 doi: 10.13465/j.cnki.jvs.2015.22.021
[16]	关洋, 徐武彬, 王国安. 螺纹锁固胶的防松效果探讨[J]. 机械研究与应用, 2013, 26(2):170-172 doi: 10.3969/j.issn.1007-4414.2013.02.062 Guan Yang, Xu Wubin, Wang Guo’an. Anti-loosening effect discussion of thread locking glue[J]. Mechanical Research Application, 2013, 26(2): 170-172 doi: 10.3969/j.issn.1007-4414.2013.02.062