Analysis of thermal safety impact of airflow on the process of femtosecond laser processing explosive charge

Wu Junying; Zheng Fude; Yao Yule; Liu Jiaxi; Chen Lang

doi:10.11884/HPLPB202436.230256

Volume 36 Issue 1

Jan. 2024

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2024 > 36(1): 011003

Wu Junying, Zheng Fude, Yao Yule, et al. Analysis of thermal safety impact of airflow on the process of femtosecond laser processing explosive charge[J]. High Power Laser and Particle Beams, 2024, 36: 011003. doi: 10.11884/HPLPB202436.230256

Citation:

Wu Junying, Zheng Fude, Yao Yule, et al. Analysis of thermal safety impact of airflow on the process of femtosecond laser processing explosive charge[J]. High Power Laser and Particle Beams, 2024, 36: 011003. doi: 10.11884/HPLPB202436.230256

Citation:

PDF( 9741 KB)

Analysis of thermal safety impact of airflow on the process of femtosecond laser processing explosive charge

doi: 10.11884/HPLPB202436.230256

State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China

Received Date: 2023-08-07
Accepted Date: 2023-12-08
Rev Recd Date: 2023-12-08

Available Online: 2024-01-15

Publish Date: 2024-01-15

Abstract

Abstract

Due to the low thermal conductivity and high sensitivity to temperature of explosive, it is highly possible to form heat accumulation inside the explosive during the continuous processing of multi-pulse femtosecond lasers, leading to dangerous events such as ignition and combustion. To reduce the thermal effects during laser processing of materials, applying airflow is a common choice. To study the motion law of ablation products generated by explosive under the action of femtosecond laser and the temperature changes in explosive under the action of airflow, a two-dimensional fluid-solid coupling calculation model of femtosecond laser processing explosive under the action of airflow is established. Numerical simulation calculations are conducted on the process of processing cyclotetramethylene-tetranitramine (HMX) explosive using femtosecond laser under the action of subsonic airflow with different incidence angles on one or both sides. The calculation results show that a unilateral airflow will form a vortex flow on the surface of the explosive, causing the ablation products to rotate on the surface of the explosive, exacerbating the thermal effect of the ablation products on the explosive; The bilateral airflow will form a large vortex flow far from the surface of the explosive, causing the ablation products to leave the surface of the explosive quickly, effectively reducing the temperature of the explosive and improving the safety in the process of femtosecond laser processing explosive.
- femtosecond laser,
- explosive,
- numerical simulation,
- airflow,
- thermal safety

FullText(HTML)

References(22)

References

[1]	王文亭, 胡冰, 王明伟. 飞秒激光精细加工含能材料[J]. 物理学报, 2013, 62:060601 doi: 10.7498/aps.62.060601 Wang Wenting, Hu Bing, Wang Mingwei. Femtosecond laser fine machining of energetic materials[J]. Acta Physica Sinica, 2013, 62: 060601 doi: 10.7498/aps.62.060601
[2]	李全俊, 王国辉, 雷林, 等. 废旧弹药拆分技术现状与发展[J]. 兵工自动化, 2018, 37(5):93-96 Li Quanjun, Wang Guohui, Lei Lin, et al. Present situation and development of waste ammunition decomposition technology[J]. Ordnance Industry Automation, 2018, 37(5): 93-96
[3]	Roos E V, Benterou J J, Lee R S, et al. Femtosecond laser interaction with energetic materials[C]//Proceedings of SPIE 4760, High-Power Laser Ablation IV. 2002: 415-423.
[4]	Roeske F, Benterou J, Lee R, et al. Cutting and machining energetic materials with a femtosecond laser[J]. Propellants, Explosives, Pyrotechnics, 2003, 28(2): 53-57. doi: 10.1002/prep.200390008
[5]	Boley C D, Cutter K P, Fochs S N, et al. Interaction of a high-power laser beam with metal sheets[J]. Journal of Applied Physics, 2010, 107: 043106. doi: 10.1063/1.3284204
[6]	李君神. 切向气流环境中激光辐照下薄铝板响应初步研究[D]. 长沙: 国防科学技术大学, 2012 Li Junshen. Preliminary research on the response of thin aluminum plate subjected to laser irradiation and tangential gas flow[D]. Changsha: National University of Defense Technology, 2012
[7]	张永强, 陶彦辉, 张黎. 亚声速切向气流对激光辐照TA15钛合金热响应的影响[J]. 应用激光, 2014, 34(1):32-35 doi: 10.3788/AL20143401.0032 Zhang Yongqiang, Tao Yanhui, Zhang Li. Effect of subsonic tangential flow on the thermal response of TA15 Ti alloy irradiated by laser[J]. Applied Laser, 2014, 34(1): 32-35 doi: 10.3788/AL20143401.0032
[8]	蒙文, 张文杰, 李云霞, 等. 切向气流作用下激光辐照对尼龙材料的热烧蚀规律[J]. 光学精密工程, 2017, 25(2):351-357 doi: 10.3788/OPE.20172502.0351 Meng Wen, Zhang Wenjie, Li Yunxia, et al. Thermal ablation law of laser irradiation on nylon materials under tangential airflow[J]. Optics and Precision Engineering, 2017, 25(2): 351-357 doi: 10.3788/OPE.20172502.0351
[9]	Yamamoto R, Parker J, Boley C D, et al. Laser-material interaction studies utilizing the solid-state heat capacity laser[R]. Livermore: Lawrence Livermore National Laboratory, 2007.
[10]	Boley C D, Fochs S N, Rubenchik A M. Lethality effects of a high-power solid-state laser[R]. Livermore: Lawrence Livermore National Laboratory, 2007.
[11]	Boley C D, Fochs S N, Rubenchik A M. Large-spot material interactions with a high-power solid-state laser beam[R]. Livermore: Lawrence Livermore National Laboratory, 2008.
[12]	张健, 黄晨光. 外部流场对激光加热运动目标影响的数值模拟[J]. 强激光与粒子束, 2007, 19(11):1817-1821 Zhang Jian, Huang Chenguang. Numerical simulation of airflow effect on moving body under laser irradiation[J]. High Power Laser and Particle Beams, 2007, 19(11): 1817-1821
[13]	陈敏孙, 江厚满, 刘泽金. 切向气流对激光辐照树脂基复合材料的影响[J]. 强激光与粒子束, 2010, 22(12):2848-2852 doi: 10.3788/HPLPB20102212.2848 Chen Minsun, Jiang Houman, Liu Zejin. Effect of tangential airflow on resin composite irradiated by laser[J]. High Power Laser and Particle Beams, 2010, 22(12): 2848-2852 doi: 10.3788/HPLPB20102212.2848
[14]	胡鹏, 陈发良. 高速气流中激光加热平板数值模拟与分析[J]. 强激光与粒子束, 2011, 23(7):1935-1939 doi: 10.3788/HPLPB20112307.1935 Hu Peng, Chen Faliang. Numerical simulation of plane target in airflow under laser irradiation[J]. High Power Laser and Particle Beams, 2011, 23(7): 1935-1939 doi: 10.3788/HPLPB20112307.1935
[15]	赵晓利, 孙振旭, 安亦然, 等. 高超声速气动热的耦合计算方法研究[J]. 科学技术与工程, 2010, 10(22):5450-5455,5461 Zhao Xiaoli, Sun Zhenxu, An Yiran, et al. Coupled flow-thermal analysis approach for hypersonic aerodynamic heating[J]. Science Technology and Engineering, 2010, 10(22): 5450-5455,5461
[16]	李鹏飞, 吴颂平. 二维圆柱在高超声速气流中的耦合传热计算[J]. 导弹与航天运载技术, 2010(6):34-37 Li Pengfei, Wu Songping. Coupling calculation of heat conduction in 2D column in hypersonic flows[J]. Missiles and Space Vehicles, 2010(6): 34-37
[17]	刘嘉锡, 伍俊英, 杨利军, 等. 单脉冲飞秒激光烧蚀炸药过程的热效应研究[J]. 强激光与粒子束, 2020, 32:071007 doi: 10.11884/HPLPB202032.200061 Liu Jiaxi, Wu Junying, Yang Lijun, et al. Analysis of thermal effect on explosives of single-pulse femtosecond laser ablation[J]. High Power Laser and Particle Beams, 2020, 32: 071007 doi: 10.11884/HPLPB202032.200061
[18]	刘嘉锡. 飞秒激光烧蚀炸药过程的热力响应机理和作用规律研究[D]. 北京: 北京理工大学, 2022 Liu Jiaxi. Thermodynamic mechanism and action law of femtosecond laser ablation of explosive[D]. Beijing: Beijing Institute of Technology, 2022
[19]	张金龙, 郭子如, 杜明燃, 等. RDX的爆炸产物组成和爆热的计算与分析[J]. 煤矿爆破, 2019, 37(4):24-27 Zhang Jinlong, Guo Ziru, Du Mingran, et al. Calculation and analysis of explosive product composition and heat of RDX[J]. Coal Mine Blasting, 2019, 37(4): 24-27
[20]	Tarver C M, Tran T D. Thermal decomposition models for HMX-based plastic bonded explosives[J]. Combustion and Flame, 2004, 137(1/2): 50-62.
[21]	陈朗, 马欣. 炸药热安全性理论与分析方法[M]. 北京: 国防工业出版社, 2015 Chen Lang, Ma Xin. Theory and analysis method of thermal safety of explosive[M]. Beijing: National Defense Industry Press, 2015
[22]	杨利军. 飞秒激光烧蚀炸药的作用机理研究[D]. 北京: 北京理工大学, 2021 Yang Lijun. Mechanism of femtosecond laser ablation of explosive[D]. Beijing: Beijing Institute of Technology, 2021