Design and research of C-band miniaturized high power microwave output window

Mao Pengxin; Tang Yongliang; Wang Xiufang; Liu Qingxiang

doi:10.11884/HPLPB202436.230359

Volume 36 Issue 3

Feb. 2024

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2024 > 36(3): 033008

Mao Pengxin, Tang Yongliang, Wang Xiufang, et al. Design and research of C-band miniaturized high power microwave output window[J]. High Power Laser and Particle Beams, 2024, 36: 033008. doi: 10.11884/HPLPB202436.230359

Citation:

Mao Pengxin, Tang Yongliang, Wang Xiufang, et al. Design and research of C-band miniaturized high power microwave output window[J]. High Power Laser and Particle Beams, 2024, 36: 033008. doi: 10.11884/HPLPB202436.230359

Citation:

PDF( 11323 KB)

Design and research of C-band miniaturized high power microwave output window

doi: 10.11884/HPLPB202436.230359

School of Physical Science and Technology, Southwest Jiaotong University, Chengdu 610031, China

Received Date: 2023-10-17
Accepted Date: 2024-01-11
Rev Recd Date: 2024-01-11

Available Online: 2024-02-02

Publish Date: 2024-02-29

Abstract

Abstract

To meet the high power capacity and compact application requirements of microwave output window in high power microwave system, a C-band miniaturized high power microwave output window is designed based on the design theory of traditional box window by optimizing the form structure and adding transition segments. By increasing the surface area of the window and changing the connection mode of the rectangular waveguide-circular waveguide transition segment, the power capacity can be increased and the longitudinal size of the microwave output window can be reduced. The “I” form structure can effectively suppress the influence of multipactor near the triple point(vacuum-media-mental) on the performance of the output window. On the basis of electromagnetic simulation, the multipactor near the triple point of the microwave output window is studied by using the Particle-in-Cell method. From the microscopic point of view, it is further confirmed that the "I" form structure can make the position of the triple point move, reduce the probability of multipactor generated by the electrons emitted by the triple point on the surface of the window, and reduce the breakdown risk of the microwave output window. The design results show that the main mode reflection coefficient of the microwave output window at the center frequency is lower than 0.01, the transmission efficiency is higher than 99.9%, and the power capacity can reach 47.9 MW.
- high power microwave,
- output window,
- miniaturization,
- power capacity,
- triple point,
- multipactor

FullText(HTML)

References(18)

References

[1]	陈凯柏, 周晓东, 高敏. 高功率微波技术研究进展及应用[J]. 飞航导弹, 2019(6):1-6 Chen Kaibai, Zhou Xiaodong, Gao Min. Research progress and application of high power microwave technology[J]. Winged Missile Journal, 2019(6): 1-6
[2]	柴媛媛. Ku波段高功率紧凑型微波输出窗的研究[D]. 成都: 西南交通大学, 2016: 1-4 Chai Yuanyuan. Research of the Ku band compact high-power microwave output window[D]. Chengdu: Southwest Jiaotong University, 2016: 1-4
[3]	陈辉, 王丽, 罗勇, 等. Q波段回旋行波管新型盒型输出窗的设计[J]. 强激光与粒子束, 2015, 27:013002 doi: 10.11884/HPLPB201527.013002 Chen Hui, Wang Li, Luo Yong, et al. Design of pill-box output window for high power Q-band gyrotron traveling wave tube[J]. High Power Laser and Particle Beams, 2015, 27: 013002 doi: 10.11884/HPLPB201527.013002
[4]	唐浩倍. 大功率微波输能窗击穿现象研究[D]. 湘潭: 湘潭大学, 2020: 1-2 Tang Haobei. Research on breakdown phenomenon of high power microwave window[D]. Xiangtan: Xiangtan University, 2020: 1-2
[5]	杨修东, 张瑞. 具有渐变波导的W波段输出窗仿真与实验研究[J]. 真空科学与技术学报, 2016, 36(9):1024-1029 Yang Xiudong, Zhang Rui. Simulation and experimental studies on a W-band output window with conversion waveguides[J]. Chinese Journal of Vacuum Science and Technology, 2016, 36(9): 1024-1029
[6]	柴媛媛, 刘庆想, 张健穹, 等. X波段新型圆波导输出窗的研究[J]. 微波学报, 2014, 30(s1):525-527 Chai Yuanyuan, Liu Qingxiang, Zhang Jianqiong, et al. The investigation of a new type circular waveguide window on X-band[J]. Journal of Microwaves, 2014, 30(s1): 525-527
[7]	Chang Chao, Liu Guozhi, Huang Huijun, et al. Suppressing high-power microwave dielectric multipactor by the sawtooth surface[J]. Physics of Plasmas, 2009, 16: 083501. doi: 10.1063/1.3200900
[8]	Chang Chao, Huang Huijun, Liu Guozhi, et al. The effect of grooved surface on dielectric multipactor[J]. Journal of Applied Physics, 2009, 105: 123305. doi: 10.1063/1.3153947
[9]	Edmiston G F, Krile J T, Neuber A A. Imaging of high-power microwave-induced surface flashover on a corrugated dielectric window[J]. IEEE Transactions on Plasma Science, 2008, 36(4): 946-947. doi: 10.1109/TPS.2008.922428
[10]	Hao Xiwei, Zhang Guanjun, Qiu Shi, et al. Investigation on dielectric window treelike breakdown and suppression under HPM in vacuum[J]. IEEE Transactions on Plasma Science, 2010, 38(6): 1403-1410. doi: 10.1109/TPS.2010.2044154
[11]	常超. 高功率微波系统中的击穿物理[M]. 北京: 科学出版社, 2016 Chang Chao. Breakdown physics in high power microwave systems[M]. Beijing: Science Press, 2016
[12]	Zhang Xue, Wang Yong, Fan Junjie, et al. The suppression effect of a periodic surface with semicircular grooves on the high power microwave long pill-box window multipactor phenomenon[J]. Physics of Plasmas, 2014, 21: 092101. doi: 10.1063/1.4894222
[13]	张雪, 王滔, 俞倩倩, 等. 波导型高功率微波输能窗的研究进展[J]. 强激光与粒子束, 2021, 33:023001 doi: 10.11884/HPLPB202133.200257 Zhang Xue, Wang Tao, Yu Qianqian, et al. Research progress of high-power waveguide window[J]. High Power Laser and Particle Beams, 2021, 33: 023001 doi: 10.11884/HPLPB202133.200257
[14]	Cai Libing, Wang Jianguo, Zhu Xiangqin, et al. Suppression of multipactor discharge on a dielectric surface by an external magnetic field[J]. Physics of Plasmas, 2011, 18: 073504. doi: 10.1063/1.3602080
[15]	Korzekwa R, Lehr F M, Krompholz H G, et al. The influence of magnetic fields on dielectric surface flashover[J]. IEEE Transactions on Electron Devices, 1991, 38(4): 745-749. doi: 10.1109/16.75200
[16]	丁耀根. 大功率速调管的理论与计算模拟[M]. 北京: 国防工业出版社, 2008 Ding Yaogen. Theory and computer simulation of high power klystron[M]. Beijing: National Defense Industry Press, 2008
[17]	丁耀根. 大功率速调管的设计制造和应用[M]. 北京: 国防工业出版社, 2010 Ding Yaogen. Design, manufacture and application of high power klystron[M]. Beijing: National Defense Industry Press, 2010
[18]	王文祥. 真空电子器件[M]. 北京: 国防工业出版社, 2012 Wang Wenxiang. Vacuum electronic devices[M]. Beijing: National Defense Industry Press, 2012