Timing system for turn-by-turn BPM system in NSRL

zhan zhi-feng; ma qing-li; wang jun-hua; yin ze-jie; wu xiao-yi

Volume 15 Issue 05

May 2003

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2003 > 15(05): 0-

zhan zhi-feng, ma qing-li, wang jun-hua, et al. Timing system for turn-by-turn BPM system in NSRL[J]. High Power Laser and Particle Beams, 2003, 15.

Citation:

zhan zhi-feng, ma qing-li, wang jun-hua, et al. Timing system for turn-by-turn BPM system in NSRL[J]. High Power Laser and Particle Beams, 2003, 15.

zhan zhi-feng, ma qing-li, wang jun-hua, et al. Timing system for turn-by-turn BPM system in NSRL[J]. High Power Laser and Particle Beams, 2003, 15.

Citation:

zhan zhi-feng, ma qing-li, wang jun-hua, et al. Timing system for turn-by-turn BPM system in NSRL[J]. High Power Laser and Particle Beams, 2003, 15.

PDF( 170 KB)

Timing system for turn-by-turn BPM system in NSRL

1.
Department of Modern Physics,University of Science and Technology of China,P.O.Box 4,Hefei 230027,China;
2.
National Synchroron Radiation Laboratory,University of Scicence and Technology of China,P.O.Box 6022,Hefei,230029,China

Publish Date: 2003-05-15

Abstract

Abstract

During the PhaseII project of NSRL, in order to monitor the injecting effectiveness, damping rate and Beta oscillation after update of injection and RF system, a turn-by-turn system of HLS has been produced for storage ring diagnostics. Timing system is an important component of turn-by-turn system. It provides synchronous clock signal with certain bunch in storage ring for data acquisition system. Programmable time-delay and remote control are available in this system. Total time-delay range of this system is 220ns, step 0.5ns. Time jitter of clock signals is less than 200ps.
- turn-by-turn system,
- programmable time-delay,
- time jitter,
- client/server