liu lie, xu xiao-jun, yang jian-kun, et al. Experiments of solid state heat capacity laser using spark switch[J]. High Power Laser and Particle Beams, 2005, 17.
Citation:
liu lie, xu xiao-jun, yang jian-kun, et al. Experiments of solid state heat capacity laser using spark switch[J]. High Power Laser and Particle Beams, 2005, 17.
liu lie, xu xiao-jun, yang jian-kun, et al. Experiments of solid state heat capacity laser using spark switch[J]. High Power Laser and Particle Beams, 2005, 17.
Citation:
liu lie, xu xiao-jun, yang jian-kun, et al. Experiments of solid state heat capacity laser using spark switch[J]. High Power Laser and Particle Beams, 2005, 17.
Under the conditions of the quick-charging to energy storage net with constant current and the pre-igniting of the Xe lamp, by controlling the voltage value and the repetitive frequency of the spark switch, the laser output in the heat capacity mode using a Nd:Glass laser pumped by the Xe lamp was obtained. Its output parameters were as follows: the repetition frequency was 4 Hz, the single-pulse energy 40 J, the lasting time 25 s, the output energy 4 kJ, and the operating interval 10 min. In addition, when the lasing on target each time, the laser could penetrate an aluminum plate with thickness of 1.5 cm. The output power of the laser could be scaled up to the order of kW, therefore many experiments related with the heat capacity mode can be made completely.
DownLoad: