MC模拟无卷积全谱转换法测量X,γ辐射剂量

Measurement of environmental level X, γ dose with conversion of complete spectra without deconvolution method of MC simulation

  • 摘要: 为了更好地进行环境X/γ辐射剂量的测量,通过对电制冷高纯锗探测器蒙特卡罗建模获取0.01~1.5 MeV能量范围内的能谱和剂量(率)值,并利用无卷积全谱转换法进行能谱-剂量转换研究。研究发现,通过无卷积全谱转换法计算得到的剂量率与模拟剂量率符合较好;通过在中国计量研究院环境γ辐射空气吸收剂量标准辐射场中进行Co-60和Cs-137放射源剂量率实验验证,结果显示,在0.01~1.5 MeV的能量范围内,通过能谱-剂量转换得到剂量率与标准剂量率的误差小于±10%,这表明通过无卷积全谱转换法进行能谱-剂量(率)转换系数的求解是可行的。

     

    Abstract: For the accurate measurement of environmental X/γ radiation dose rate, the conversion from energy spectrum to dose rate is used. In this paper, the energy spectrum and dose value of the electrically cooled high-purity germanium detector (HPGe detector) in the energy range of 0.01−1.5 MeV are obtained by Monte Carlo simulation. And the method “Conversion of complete spectra without deconvolution” is used for energy spectrum-dose conversion study. It is found that the dose rate calculated by Conversion of complete spectra without deconvolution method is in good agreement with the simulated dose rate. Experimental verification was carried out in the standard radiation field (Co-60, Cs-137) of the environmental γ radiation air absorbed dose of the China Institute of Metrology, the result shows that in the energy range of 0.01−1.5 MeV, the error between the dose rate value obtained by energy spectrum-dose conversion and the standard dose rate value is less than ±10%. The study shows that it is feasible to solve the energy spectrum-dose (rate) conversion coefficient by the method “Conversion of complete spectra without deconvolution”.

     

/

返回文章
返回