Abstract:
Background High-power microwave (HPM) are easy to cause damage to unmanned aerial vehicle (UAV). Existing studies pay insufficient attention to the damage effect of HPM with different radiation parameters on UAV’s datalink.
Purpose To obtain the damage threshold of UAV’s datalink under different HPM irradiation scenarios, the target power density was derived theoretically under different incident angle and distance, and radiation experiments on airborne antenna and injection experiments on low-noise amplifiers (LNA) were carried out to assess the action effect of UAV’s datalink under HPM radiation.
Methods Ground-based HPM and airborne HPM action models were established to analyze the action range and typical power densities of different distances, half-power beamwidths and oblique incidence angles. Through injection experiments, the nonlinear and damage effects of LNA under L-band HPM was investigated. Combined with the coupling voltage of the airborne antenna and the damage threshold of the LNA, the damage assessment curve of UAV’s datalink under in-band HPM radiation was derived.
Results The results show that different action effects on UAV can be realized by selecting the appropriate distance, half-power beamwidths and oblique incidence angles, and the LNA in the UAV's datalink receiver circuit is the main target of HPM sources. When the target power density reaches 1452 W/m2, it will cause damage to two stages of the LNA of tested datalink.
Conclusions The damage threshold of LNAs provides experimental references for the radio frequency (RF) front-end protection of UAV’s datalink. Furthermore, the revealed action effects under HPM with different parameters offer theoretical support for the efficient countermeasure against UAVs and UAV swarms.