金属离子致合金靶二次电子发射系数的实验测量研究

Experimental investigation of metal-ion-induced secondary electron emission yields from alloy targets

  • 摘要: 离子致二次电子发射系数是描述离子与固体表面相互作用过程中电子发射行为的核心参数,在离子束物理与聚变研究领域具有重要基础意义。离子束空间电荷形成的电场会使低能二次电子发生偏转,导致其难以被完全收集,离子致二次电子的准确测量至今仍是一项技术挑战。针对此问题,本文设计并搭建了一套基于圆筒状收集极与可调偏压的测量系统,采用分步测量策略:在收集极施加负偏压以抑制二次电子,获得入射离子流,切换为正偏压以收集二次电子获得电子流,由靶电流与收集极电流解耦测量得到发射系数。利用该装置测量了8~20 keV能量范围内Ti、Gd离子入射316L不锈钢、GH3625、Monel 400、Ta及Mo靶材的发射系数,实验值与基于电离能损分布与电子输运逃逸概率建立的理论模型吻合良好,发射系数随离子能量升高而单调增加,40°倾斜入射时较垂直入射增加约60%;相同能量下Gd离子的发射系数明显高于Ti离子,并对相关物理机制进行了简明分析。

     

    Abstract:
    Background The ion-induced secondary electron yield (SEY) is a key parameter in describing electron emission during ion–solid surface interactions and affects surface charge balance, plasma sheath potential, beam transport, and detector response. However, accurate SEY measurement for keV metal ions remains challenging because the space-charge field of the ion beam deflects low-energy secondary electrons and prevents their complete collection.
    Purpose This study presents a reliable method for measuring the SEY of metal ions incident on engineering alloys and metal targets and clarifies the dependence of SEY on ion energy, ion species, and incidence angle.
    Methods A measurement system based on a cylindrical collector with adjustable bias was designed and constructed. A stepwise bias strategy was adopted: a negative bias of −500 V was applied to the collector to suppress secondary electrons and determine the incident ion current, whereas a positive bias, selected by a quasi-static two-dimensional electrostatic model, was applied to collect the emitted electrons completely. The SEY was obtained by decoupling the contributions of the two currents.
    Results Measurements were performed for Ti and Gd ions at energies of 8–20 keV incident on 316L stainless steel, GH3625, Monel 400, Ta, and Mo targets at incidence angles of 0°–40°. The measured yields agree well with predictions from a semi-empirical model based on the ionization energy deposition and the escape probabilities of secondary electrons. The SEY increases monotonically with ion energy. At an incidence angle of 40°, the yield is higher than that at normal incidence. At the same incident energy, Gd ions produce substantially higher yields than Ti ions.
    Conclusions The proposed stepwise bias method provides reliable SEY data for keV metal ions and engineering targets. The observed dependences are attributed mainly to near-surface ionization energy deposition, electron escape probability, and the geometric path effect. The results provide a useful experimental basis for beam-line design and precision measurement in ion-beam and fusion-related applications.

     

/

返回文章
返回