单频纳秒脉冲全光纤激光器实现300 W平均功率输出

Single-frequency nanosecond pulsed laser with output power of 300 W in all-fiber format

  • 摘要: 搭建了一台主振荡功率放大(MOPA)结构的单频脉冲全光纤激光器。通过对线宽为 20 kHz 的连续单频激光器进行强度调制,获得了重复频率 10 MHz、脉宽约 8 ns、平均功率约 0.5 mW 的单频脉冲种子激光。采用多级掺镱光纤放大器对脉冲种子激光进行级联放大,获得了平均功率 300.8 W 的高功率激光输出。目前,激光器输出功率仅受限于泵浦功率,有望通过增加泵浦功率进一步提高输出功率。

     

    Abstract: A master oscillator power amplifier(MOPA) structured pulsed Yb fiber laser is set up. The single-frequency pulsed seed, with a repetition rate of 10 MHz, a pulse duration of about 8 ns, and an average power of 0.5 mW, is obtained by externally modulating a continuous wave laser with line width of 20 kHz. The pulsed seed is amplified to 300.8 W of average power with four Yb-doped fiber amplifiers. Further power-scaling of this MOPA structure can be realized since our experiment is only pump-power limited.

     

/

返回文章
返回