HL-3装置电子回旋长脉冲高压电源及控制系统研制

李春林; 毛晓惠; 李青; 王雅丽; 夏于洋; 范臻圆; 王英翘

doi:10.11884/HPLPB202537.240303

HL-3装置电子回旋长脉冲高压电源及控制系统研制

doi: 10.11884/HPLPB202537.240303

核工业西南物理研究院，成都 610225

基金项目: 西物创新行动项目(202201XWCX002)

详细信息

作者简介:
李春林，lichunlin@swip.ac.cn

通讯作者:
王英翘，wangyq@swip.ac.cn。

中图分类号: TL62⁺3
计量
- 文章访问数: 126
- HTML全文浏览量: 37
- PDF下载量: 17
- 被引次数: 0
出版历程
- 收稿日期: 2024-09-14
- 修回日期: 2025-02-17
- 录用日期: 2025-02-17
- 网络出版日期: 2025-03-07
- 刊出日期: 2025-03-15

Development of controller and control system for HL-3 device’s electronic cyclotron long-pulse high-voltage power supply module

Southwest Institute of Physics, Chengdu 610225, China

摘要

摘要: 为了开展高参数物理研究，研制了满足脉冲发电机组、电网供电需求的长脉冲开关电源模块及控制系统。电源模块通过改变交流接线端接线方式进行模块供电类型切换，通过内置的软启电路减小模块充电过程中浪涌电流冲击对电网及开关的影响，模块控制器满足两种运行方式下的保护、驱动、状态监测设计需求。控制系统采用单片机及可编程逻辑门阵列架构，具有液晶屏本地/上位机远程两种控制功能。在单片机中采用集成电路总线扩展IO的方式实现软启控制、监测功能，减少数据传输链路及系统的复杂性；在可编程逻辑门阵列中实现电源的控制算法，并通过电平信号转换处理，统一了光电转换箱接口设计。在搭建的测试条件下测试结果表明，模块及控制系统设计满足要求，电源实现80 kV/100 s/20 A输出参数测试及保护实验测试。
- 高压电源 /
- 微控制器 /
- 现场可编程逻辑门阵列 /
- 集成电路总线
Abstract: To conduct high parameter physics research, a long pulse switching power supply module and control system were developed to meet the power supply needs of pulse generator sets and power grids. By changing the wiring method of the AC terminal, the module power supply type can be switched. The built-in soft start circuit can reduce the impact of surge current on the power grid and switches during the module charging process. The module meets the design requirements for protection, driving, and status monitoring under two operating modes. The controller adopts a microcontroller and programmable logic gate array architecture, with both local and remote control functions. It implements soft start control and monitoring functions in microcontrollers by using integrated circuit bus to expand IO, reducing the complexity of data transmission links and systems; The control algorithm of the power supply is implemented in the programmable logic gate array, and the interface design of the photoelectric conversion box is unified through level signal conversion processing. The test results under the established testing conditions show that the module and control system design meet the requirements, and the power supply achieves 80 kV/100 s/20 A output parameter testing and protection experiment testing.
- high voltage power supply /
- MCU /
- FPGA /
- IIC

HTML全文

图 1 电源主回路结构

Figure 1. Main circuit structure of high voltage power supply

下载: 全尺寸图片幻灯片

图 2 开关电源模块主回路

Figure 2. Main circuit of switch power supply module

下载: 全尺寸图片幻灯片

图 3 开关电源模块控制器

Figure 3. Switch power supply module controller

下载: 全尺寸图片幻灯片

图 4 实时控制系统的结构

Figure 4. Structure diagram of Real-Time control system

下载: 全尺寸图片幻灯片

图 5 控制器实物平台

Figure 5. Controller physical platform

下载: 全尺寸图片幻灯片

图 6 控制流程图

Figure 6. Control flow chart

下载: 全尺寸图片幻灯片

图 7 高压电源测试平台

Figure 7. High voltage power supply test platform

下载: 全尺寸图片幻灯片

图 8 软启过程中电压波形

Figure 8. Voltage waveform during soft start process

下载: 全尺寸图片幻灯片

图 9 输出电压与电流波形

Figure 9. Output voltage and output current waveform

下载: 全尺寸图片幻灯片

图 10 过流保护测试波形

Figure 10. Over current protection test waveform

下载: 全尺寸图片幻灯片

参考文献(11)

[1]	毛晓惠, 李青, 王雅丽, 等. 基于脉冲调制技术的LHCD大功率阴极高压电源[J]. 强激光与粒子束, 2016, 28:015004 doi: 10.11884/HPLPB201628.015004 Mao Xiaohui, Li Qing, Wang Yali, et al. LHCD cathode high voltage power supply based on pulse step modulator[J]. High Power Laser and Particle Beams, 2016, 28: 015004 doi: 10.11884/HPLPB201628.015004
[2]	徐伟东, 宣伟民, 姚列英, 等. PSM高压脉冲电源单元研制[J]. 高电压技术, 2009, 35(6):1409-1414 Xu Weidong, Xuan Weimin, Yao Lieying, et al. Development of one PSM high voltage pulse power supply unit[J]. High Voltage Engineering, 2009, 35(6): 1409-1414
[3]	Toigo V, Piovan R, Zanotto L, et al. The control system of the RFX toroidal power supply[J]. Fusion Engineering and Design, 2005, 75/79: 55-59. doi: 10.1016/j.fusengdes.2005.06.292
[4]	Yao Lieying, Wang Yingqiao, Mao Xiaohui, et al. A fully digital controller of high-voltage power supply for ECRH system on HL-2A[J]. IEEE Transactions on Plasma Science, 2012, 40(3): 793-797. doi: 10.1109/TPS.2012.2185834
[5]	Pang Qingle, Zhang Min. Design of digital control system for pulsed MIG welding power source[C]//8th World Congress on Intelligent Control and Automation. 2020: 2492-2495.
[6]	黄波, 黄梅, 陈文光, 等. 电子回旋共振加热系统中全固态阳极高压电源硬件电路设计[J]. 核聚变与等离子体物理, 2018, 38(1):55-62 Huang Bo, Huang Mei, Chen Wenguang, et al. Design of hardware circuits of solid-state anode high-voltage power supply in electron cyclotron resonance heating system[J]. Nuclear Fusion and Plasma Physics, 2018, 38(1): 55-62
[7]	Zhang Jian, Hao Xu, Wei Wei, et al. The design of PSM-based ECRH power supply control system[J]. Journal of Power and Energy Engineering, 2016, 4(4): 91-102. doi: 10.4236/jpee.2016.44009
[8]	Takahashi A, Tanaka T, Fujita H, et al. Development of −1 MV DC filter and high-voltage DC measurement systems for ITER NBI[J]. IEEJ Transactions on Power and Energy, 2018, 138(2): 166-174. doi: 10.1541/ieejpes.138.166
[9]	Kashiwagi M, Hiratsuka J, Ichikawa M, et al. 100s negative ion accelerations for the JT-60SA negative-ion-based neutral beam injector[J]. Nuclear Fusion, 2022, 62: 026025. doi: 10.1088/1741-4326/ac388a
[10]	Ganuza D, Del Rı́o J M, Garcı́a I, et al. 130 kV 130 a high voltage switching mode power supply for neutral beam plasma heating: design issues[J]. Fusion Engineering and Design, 2003, 66/68: 615-620. doi: 10.1016/S0920-3796(03)00173-X
[11]	Vila R, Hodgson E R. Dielectric loss during irradiation of a candidate ITER NBI RF ion-source insulator[J]. Journal of Nuclear Materials, 2011, 417(1/3): 787-789.