一种小型化脉冲行波管高压电源设计与实现

Design and implementation of a miniaturized high voltage power supply for pulse traveling wave tube

  • 摘要: 为满足雷达整机对发射机小型化的需求,针对8~18 GHz宽带脉冲行波管设计了一种小型化高压电源。采用脉冲峰值功率设计方法,结合高压电容储能,实现了行波管在脉冲工作期间高压稳定输出。同时主功率逆变电路采用了移相全桥拓扑结构,高压整流电路采用了碳化硅二极管,这可减轻电源的散热压力,提高高压电源的功率密度。研制的小型化脉冲高压电源,阴极电压−6.5 kV,最大工作脉宽2 ms,峰值功率最大1600 W。与某型号脉冲行波管联调,在脉冲工作期间行波管输出射频信号功率稳定,测试结果验证了该设计方法的可行性。

     

    Abstract: To meet the demand of radar for miniaturization of transmitter, a miniaturized high-voltage power supply is designed for a certain type of TWT. The high voltage power supply adopts a phase shifted full bridge topology structure, and the high voltage rectifier circuit uses SiC diodes to improve the power density of the power supply. The miniaturized pulse high-voltage power supply has been developed, with a cathode voltage of −6.5 kV, a maximum working pulse width of 2 ms, and a peak power of 1600 W. The joint test with traveling-wave tube shows that the output RF power of TWT is stable during pulse operation. The test results verify the feasibility of the design method.

     

/

返回文章
返回